Manual

fastenmaster, 153 BOWLes rOaD, aGaWam, ma 01001 WWW.fastenmaster.COm

For more information or free samples,

call FastenMaster at 800

518

3569.

Replaces Old Popping

Gutter Spikes!

•

Oversizedthreaddiameter

tightlyllstheexistingspike

holeforbetterholdingstrength

andawatertightt

•

#3squaredrivevirtually

eliminatescam-outduring

hard-to-reachinstallations

•

DurableUVresistantwhite

andbrownhead-paintmatches

mostguttersystems

•

Thickgalvanizedbasecoating

guaranteednottorustorreact

withaluminum

•

Freedriverbitincluded

•

Americanmade

PAGE 1
Replaces Old Popping Gutter Spikes! • O versized thread diameter tightly fills the existing spike hole for better holding strength and a watertight fit • # 3 square drive virtually eliminates cam-out during hard-to-reach installations • D urable UV resistant white and brown head-paint matches most gutter systems • T hick galvanized base coating guaranteed not to rust or react with aluminum • Free driver bit included • American made For more information or free samples, call FastenMaster at 800.518.
PAGE 2
INSTALLATION PROCEDURE FMGUTSHEET (0211) For existing gutters installed using spikes, first remove the existing spike and ferrule. With a standard drill install the FastenMaster GutterScrew and ferrule using the #3 square drive bit provided. For new gutter installations, pre-drill a ¼" hole with spacing as recommended by the gutter manufacturer. Then install the new gutter screw and ferrule as instructed above.