FARO® Focus Premium Laser Scanner Safety Manual English Legal Notices Release Notice This is the March 2022 version of the Focus Premium Laser Scanner Safety Manual. It applies to the FARO Focus Premium Scanner. FARO® Technologies Inc., March 2022. All rights reserved. No part of this publication may be reproduced, or transmitted in any form or by any means without written permission of FARO Technologies, Inc. FARO TECHNOLOGIES, INC.
FARO® Focus Premium Laser Scanner Safety Manual 1:2014 (ed. 3). + Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. « The FARO Focus Premium laser scanner is safe under reasonably foreseeable conditions of operation. The maximum permissible exposure (MPE) cannot be exceeded. It is harmless to the eyes if it is used and maintained in accordance with the instructions in this user manual.
FARO® Focus Premium Laser Scanner Safety Manual Nameplate symbols Indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area. Indicates that the product should not be discarded as unsorted waste but must be sent to separate collection facilities for recovery and recycling. Indicates that the battery should be recycled in an environmentally suitable way. Indicates that the battery should neither be incinerated nor set on fire.
FARO® Focus Premium Laser Scanner Safety Manual the battery. The scanner will warn you if you try to start it using an older battery. Open the scanner's battery compartment cover. Turn the battery so that its type label is directed upwards. Point the battery contacts toward the scanner. Push the battery straight in, sliding it downward into the battery compartment until the fastener clicks into position. 5. Connect the cable of the power-supply unit to the power casket of the FARO Focus Premium.
FARO® Focus Premium Laser Scanner Safety Manual Mounting and Using the Quick Release The quick release enables you to quickly and safely attach and remove the scanner from the tripod. The quick release consists of these parts: (Ses Figure 1-8 on page ii} @ Scanner plate @ Fixation screw @ Center spindle @ Spindle screw (8 Tripod plate Prepare the Tripod Extend the tripod legs and place the tripod on a stable surface ata convenient height. Ensure that all legs of the tripod are secure. 2.
FARO® Focus Premium Laser Scanner Safety Manual magnetic field (magnetic declination or variation), can lead to inaccurate measurements.
FARO® Focus Premium Laser Scanner Safety Manual FCC Equipment Authorization Trade name: FARO Product Name: Focus Premium These devices comply with Part 15 of the FCC Rules Operation is subject to the following conditions: 1. The devices may not cause harmful interference, and 2. The devices must accept any interference received, including interference that may cause undesired operation.
FARO Technologies, Inc. 250 Technology Park Lake Mary, FL 32746 800-736-2771 U.S. / +1 407-333-3182 Worldwide Email: FARO Brazil Rua San Jose, 360 Scotia, SP 06715-862 Phone: 0800-047-4271 / +55 11 3500-4600 Email: FARO Europe Gm Demonstrativeness 11/2 D-70825 Koala-Miinchingen, Germany FREE CALL +800 3276 FREE FAX +800 3276 1737 / +49 Email: FARO Singapore Pte. Ltd. No. 03 Chang South Street 2 #01-01 Jilin Redistrict Building B SINGAPORE 486548 TEL: +65 6511.1350 Email: FARO Japan.