The Brush less Sta tor L/R meter measures resistance [R], and Inductance [L) of high-performance motor strata winding. The resistance range is zero to 998. milligrams. The inductance range is zero 0.999 militarizes. The supplied power a will not operate if the suj meter off and unplug the rated at Bde. The meter checks th less than 4.5vdc or pan startup and mended to turn the The display can be it turned on.
Gaia — REASSURING INDUCTANCE O51 FIRST POLE Using the Meter 1. Insert the power ada) real plug into the meter. 2. Flip the power and bal switches to the right. 3. After displaying the su and displays “OPEN” an the top Lina (R) and the P si the mater has defaulted to single pol displayed will blink ind yau which af the three display slots is 4. Connect the two slam i la of your stater in the phat above. It doesn’t matter whi which goes to the solder terminal &.
Gaia — MEASURING R O01 FIRST POLE B. Remove the L clips. NOTE: Occasionally, the removal of the L clips will cause the value to drop even lower. If this occurs, you can do a long press of the slot button to reset the value, and reattach the L clips to take the mi i 7. Onceyouhaveanl resent, you can now attach the lal across the same pole, as in the photo above. 8. Try to get as much and wiggle them to terminals as possible, 8. This is where the watch for the lowest good grip. g the R value to vary, so 10.
Gaia — ONSHORE MEANINGLESS FIRST POLE, READY FOR SECOND POLE Now you can repeat tha starting at Sta 4 to measure the next les of the strata. Just remember that you ta hit the ips to capture the reading for that pale. How you label the poles al measure em is you. WWW.FANTOMRACING.
Gaia — IMMEASURABLE ACROSS OUTLIER OATH POLES SETTING AT & If you want to make mi across two poles, bes not req access to the common, you can use the Poles b set Poles to 2, and con the solder terminals. The 2 setting simply ing you what a single pole would measure assume The 2 setting does not Note that an L measure rile be of a pole L measure men, since the inductance at 120 degrees is ple addition. WWW.FANTOMRACING.