User's Manual

ManualsBrandsFanstel Corporation, Taipei ManualsElectronicsBlueTooth 4.0 module

Bluetooth Low Energy(BLE) Module BT600 Series Ver1.0June8,2015

Fanstel Corp. | 10F-10, 79 Xintai Wu Road, Xizhu, New Taipei City, Taiwan 22101| Tel: 886-2-2698-9328 | Fax: 886-2-2698-4813

Fanstel Technologies Corp. 11 Jiale Street, Ping-Dih, Long-Gang, Shen Zhen, 518117 China|Tel:86-0755-8409-0927|Fax:86-0755 -8409-0973

1

BLE Single Mode Module BT600 Series

Specifications:

 Processor: Nordic nRF51822

 Bluetooth: V4.0, single mode

 Frequency: 2.402～ 2.480 GHz

 Receiver Sensitivity: -91 dBm（ typical）

 Transmit Power 0dBm +/- 1 dB

 Interface UART

 Protocol AT Commands

 Operation voltage 1.8V-3.6V

 Line of Sight Range 20m (60 feet) to 50m (150 feet)

 Encryption 128 bit using CCM encryption

 Dimensions 20mmX12mmX2mm

 Operation -25°C to +75°C

 Storage -40°C to +85°C

Applications

 Smart appliances

 Wearable device

 Medical devices

 Health management devices

 Computer peripherals

 Other Bluetooth applications

Model Summaries

 Antenna range,m range,feet approval

BT600I Internal 30 90 None

BT600E External 50 150 FCC

BT600P PCB 20 60 none

DVB‐BT600 Developmentboard none

Summary of content (14 pages)

PAGE 1
Bluetooth Low Energy(BLE) Module BT600 Series Ver 1.0 June 8, 2015 BLE Single Mode Module BT600 Series Specifications:  Processor: Nordic nRF51822  Bluetooth: V4.0, single mode  Frequency: 2 . 4 0 2 ～ 2 . 4 8 0 GHz  Receiver Sensitivity: -91 dBm（typical）  Transmit Power 0dBm +/- 1 dB  Interface UART  Protocol AT Commands  Operation voltage 1.8V-3.
PAGE 2
Bluetooth Low Energy(BLE) Module BT600 Series Ver 1.0 June 8, 2015 Table Of Contents 1 Introduction ................................................................................................................................................. 3 1.1 2 Standalone Mode ...................................................................................................................................... 3 Product Overview ..................................................................................
PAGE 3
Bluetooth Low Energy(BLE) Module BT600 Series Ver 1.0 June 8, 2015 1 Introduction BT600 series Bluetooth single mode module uses Nordic nRF51822 Bluetooth Low Energy (BLE) chip. Three antenna options are offered:     BT600I with a chip antenna on module, line of sight range is 30 meters or 90 feet. BT600E, an external antenna is required. Line of sight range is 50 meters or 150 feet when used with recommended antenna.
PAGE 4
Bluetooth Low Energy(BLE) Module BT600 Series Ver 1.0 June 8, 2015 2 Product Overview 2.1 Photos The followings are pictures of BT600 module with an EMI shield on and without EMI shield. Figure 1 BT600 with an EMI shield Figure 2 BT600 without shield Fanstel Corp. | 7466 E. Monte Cristo Ave. Scottsdale, AZ 85260 USA|Tel: 1 480.948.4928 | Fax: 1 480.948.5459 | E-mail: module@fanstel.com| Fanstel Corp.
PAGE 5
Bluetooth Low Energy(BLE) Module BT600 Series Ver 1.0 June 8, 2015 2.
PAGE 6
Bluetooth Low Energy(BLE) Module BT600 Series Pin Pin name 35 P24 General purpose I/O pin, 36 P25 General purpose I/O pin 37 GND 38 P26, AIN0, XL2 39 P27, AIN1, XL1 40 P28 Ground General purpose I/O pin, ADC/LPCOMP input 0, Connection for 32.768 kHz crystal General purpose I/O pin, ADC/LPCOMP input 1, Connection for 32.
PAGE 7
Bluetooth Low Energy(BLE) Module BT600 Series Ver 1.0 June 8, 2015 3 Operation Parameters Wireless Host Interfaces Features Specifications Bluetooth V4.0 -Single Mode Frequency 2.402 - 2.480 GHz Max. Transmit Power +4 dBm Receiver Sensitivity -91 dBm, typical Whisper Mode Down to -55 dBm, transmit Link Budget 95 dB @ 1Mbps Raw Data Rate 1 Mbps over the air Total 28 lines, multi function UART TX, RX Default, 9600, N, 8, 1.
PAGE 8
Bluetooth Low Energy(BLE) Module BT600 Series Ver 1.0 June 8, 2015 4 AT Commands 4.1 Brief description of AT commands        Each command line consists of a prefix, a body and a terminator. All command lines begin with the prefix AT (ASCI I 065, 084) or at (ASCI I 097, 116). The body is a string of characters in the ASCI I range 032-255. Control characters other than < CR> (carriage return; ASCI I 013) and < BS> (back space; ASCI I 008) in a command line are ignored. The terminator is < CR> .
PAGE 9
Bluetooth Low Energy(BLE) Module BT600 Series Command AT+UART= Response Ver 1.
PAGE 10
Bluetooth Low Energy(BLE) Module BT600 Series Command Response Parameter AT_RFPW= OK or FAIL +4~-8 P00-P05 AT+PIO= OK or FAIL AT+PIS= Ver 1.0 June 8, 2015 example AT+RFPW= 1/r/n OK/r/n 0:+4 1:+0 2:-4 3:-8 AT+PIO=05, 0\r\n 1=High ,0=low OK/r/n P00-P05 1=output, 0=input OK or FAIL AT+PIS=05, 1\r\n OK/r/n 4.3 Data Mode When P23 (pin 34 of BT600) is pulled low, it is set to data mode.
PAGE 11
Bluetooth Low Energy(BLE) Module BT600 Series Ver 1.0 June 8, 2015 5 BT600 Evaluation Board 5.1 Communicating with a PC A quick and easy way to evaluate BT600 is to use a PC as the host processor. Connect the development board DVB-BT600 to a PC with an USB cable. Then,   Remove jumper JP1, BT600 is set to command mode. PC will communicate with BT600. Install jumper JP1, BT600 is set to data mode. PC will communicate with a remote device through BT600 Bluetooth wireless connection.
PAGE 12
Bluetooth Low Energy(BLE) Module BT600 Series Ver 1.0 June 8, 2015 7 CONTACT US United States: Fanstel Corp. 7466 E. Monte Ctisto Ave. Scottsdale AZ 85260 Tel. 1 480-948-4928 Fax. 1-480-948-5459 Email: module@fanstel.com Website: www.fanstel.com Taiwan: Fanstel Corp. 10F-10, 79 Xintai Wu Road Xizhu, New Taipei City, Taiwan 22101 泛世公司臺灣省新北市汐止區新臺五路 79 號 10 樓之 10, 22101 Tel. 886-2-2698-9328 Fax. 886-2-2698-4813 Email: tp@fanstel.com Website: www.fanstel.com China: Fanstel Technologies Corp.
PAGE 13
Bluetooth Low Energy(BLE) Module BT600 Series Ver 1.0 June 8, 2015 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
PAGE 14
Bluetooth Low Energy(BLE) Module BT600 Series Ver 1.0 June 8, 2015 To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed Dipole Ant / 2.0dB Note: The end product shall has the words “Contains Transmitter Module FCC ID: X8WBT600E Fanstel Corp. | 7466 E. Monte Cristo Ave. Scottsdale, AZ 85260 USA|Tel: 1 480.948.4928 | Fax: 1 480.948.