User Manual FX205F Professional Android Device
Table of contents 1. Copyright 3 2. Trademarks 3 3. Warnings and safety notices 4 4. Limitation of liability 4 5. About this manual 4 6. Device layout 6 6 6 7 6.1 Overview 6.2 Back view 6.3 Buttons and the related 7. Package contents 8. Getting started 8.1 How to switch the device ON or OFF 8.2 Home screen and synchronization 8.3 LED colors 8.4 How to access the dashboard 8.5 How to find your specific Famoco ID 8.6 How to charge the device 8.7 How to change the battery 8.
1. Copyright Copyright ©2019 Famoco. All rights reserved. This manual is protected under international copyright laws. No part of this manual may be reproduced, distributed, translated, or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or storing in any information storage and retrieval system, without the prior written permission of Famoco. We reserve the right to make modifications on print errors or update specifications without prior notice. 2.
3. Warnings and safety notices Please read all the safety notices before using this device. Do not use the device near fuel or chemicals or in any prescribed area such as service stations and refineries. Do not transport or store flammable gas, liquid or explosives in the same compartment of your vehicle as your device and accessories. 4.
o o o o 5 Content may differ from the final product, or from software provided by service providers or carriers, and is subject to change without prior notice. Available features and additional services may vary by device, software, or service provider. Applications and their functions may vary by country, region, or hardware specifications. Famoco is not liable for performance issues caused by applications from any provider other than Famoco.
. Device layout 6.1 Overview 1 Indicator light 2 Volume down 3 Front camera 4 Power button 5 Type C port 6 Audio jack 7 Power jack 6.
6.
7.
Note: o o o o The items supplied with the device and any available accessories may vary depending on the region or service provider. The supplied items are designed only for this device and may not be compatible with other devices. Appearances and specifications are subject to change without prior notice. Third party accessories may not be compatible with your device. 8. Getting started 8.
Press and hold the power button for three seconds then release. The home screen will be displayed after a few moments. To power OFF: Press and hold the power button for two seconds, then select shut down option on screen. Standby mode: The device enters the standby mode after 30 seconds by default if left alone. 8.2 Home screen and synchronization Once your device is switched on it will start synchronizing.
To set up your device you need connectivity so that it can synchronize. Please install a SIM card or set up Wi-Fi or contact your customer support. If there is a connection, one of the following screens will appear (depending on the synchronization status): If the synchronization is in progress, please wait until it is complete. If the synchronization is complete but no applications have been installed, or if the synchronization has been aborted, please contact your customer support.
8.3 LED colors The LED on the device can show different colors.
8.4 How to access the dashboard When your device is switched on you can access the dashboard by pressing the volume up button for three seconds and then release it. In the dashboard you will find: o o o o o o Famoco serial number Connectivity Time Battery level Brightness (that you can modify) Volume (that you can modify) 8.5 How to find your specific Famoco ID There are two ways of finding the unique Famoco ID: Press the volume up button to access the dashboard and then press the owner’s name.
8.6 How to charge the device 1 2 To charge the device, only use Type C port (option 1) or the jack power charger (option 2) with the respective cables supplied: 1. 2. 3. Insert the charger cable carefully. Check that the plug and socket are aligned. The indicator light will turn red to indicate that the device is charging and will turn green when full charge level is reached. The battery will reach full change in 5-6 hours.
Note: The device will power off automatically when the battery reaches 2%. 8.7 How to change the battery 1. Unclip the back-left corner where the little nook is and from this angle to remove the back cover. 2. Follow the exemplified operation to remove the battery.
3. 4. 5. Insert the new battery with the pins located against the gold springs (with label up). Press the battery down into the case. To replace the back cover, reverse step 1 and push gently to close. 8.8 How to use the battery Charge the battery promptly when empty. Do not leave the battery in a discharged state. Keep your device and battery cool. High temperatures degrade the battery more quickly. The battery will not charge when over 45°C. Do not leave on charge for more than 10 hours.
Device is able to read/write read/write NFC forum tags 1,2,3,4, Type MIFARE Classic Tag (full Mifare-ultralight/1k/4k) 8.10 About the SIM slots There are four slots in the back of the device. The first and second ones are for SIM cards, the third one for an external Secure Element and the fourth is for the SD card.
Do not attempt to remove any of the installed cards. In case of any operational problem, contact your administrator.
9. Technical specifications Processor Type Quad-core ARM@Cortex-A53 Speed 1.3GHz OS Secure Android (8.1) Memory Display Secure Elements RAM 2GB Mass Storage 16GB Characteristics 5’’ FW (960x480 pixels) IPS Touch Panel 5 Points Multi Touch Embedded SE NXP TDA8029 Removable SE SAM slot (2FF format) Operating modes Reader/writer/peer-to-peer Card emulation (ISO 14443-A) Supported tags NFC Forum 1,2,3,4.
10. Warranty information The warranty does not apply to defects or errors in the product caused by: 1. 2. 3. 4. 5. 6. 7. 20 Normal wear and tear, misuse, mishandling, and physical damage. Exposure to water or any other liquids or solvents. Any unauthorized disassembly, repair or modification. Power surges, lightning, fire, flood or other natural events. Use with unauthorized third-party products such as generic chargers. Any other cause beyond the range of normal usage for products.
11. Safety and general information The device contains delicate electronic circuitry, magnets and battery systems. You should treat it with care and pay attention to the following points: - Handle the device with care. Do not drop or throw the device. Do not immerse it in any liquid. - Do not place the device nearcomputer disks, credit cards, and other magnetic media. The information contained on disks or cards may be erased or damaged.
- Do not throw used batteries into household rubbish, return them to a recycling point. - When the battery is thrown awaycover the terminals with insulatingtape. - Be careful not to pierce the battery with sharp objects and do not use damaged batteries. - Do not disassemble or modify the battery. - Stop using the battery if abnormal heat, smell, discoloration, deformation, or abnormal condition is detected during use, charge, or storage. - Do not put the battery in your mouth.
- Do not use the device where blasting is in progress. - Do not leave the device at the bottom of the bag where it may be damaged by sharp objects. - Take care when the device is in your pocket. - Sitting down or sharp objects may damage the device. - At high volume, ever-lasting listening to audio devices can cause hearing loss. - Do not leave the device discharged or disconnected for long periods of time; your personal data may be lost and your battery life will be reduced.
- The information & images in this guide are valid at the time of publication of the guide. Changes to this information & images can be made without prior notice. 12. FCC and IC warnings FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device may accept any interference received, including interference that may cause undesired operation .
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device may accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
The SAR limit set by public authorities such as the Federal Communications Commission of the US Government (FCC), or by Innovation, Science and Economic Development Canada (ISEDC), is 1.6 W/ kg averaged over 1 gram of body tissue. The highest SAR VALUE reported to the FCC and ISED for the device type when using it at the ear is 0.536 W/kg. And when properly worn on the body is 0.756 W/kg. And when using the Wi-Fi hotspot function is 0.996 W/kg www.famoco.