Quick Installation Guide

ManualsBrandsFametech ManualsElectronicsMobile Point of System

 Specifications MP-1311

Model Description

MP-1311

Main System

Processor

Intel Atom® x5-Z8350 Quad Core 1.44GHz, up to 1.92GHz

Display

10.1-inch IPS, 1280 x 800, 300nits

Touch Panel

True-Flat Projected-Capacitive Multi Touch (PCAP)

Memory

4GB DDR3L 1600MHz

Storage

64GB eMMC

Micro-SD Slot

Up to 128GB

Communication

Wi-Fi IEEE 802.11 b/g/n, Bluetooth and GPS

Webcam

2M Front Camera (FF) and 5M Rear Camera (AF)

Speaker

2 x 0.8W Speakers

Sensor

Light Sensor, G Sensor and Gyroscope

I/O Interface

USB

1 x USB 3.0 Type A

Po-go Pin

1 x Pogo Pin (for charging and data transmission)

Peripherals

External Modules

MSR

2D Barcode Scanner

Finger Print

Power Management

Internal Battery

Lithium Polymer Battery 4800mAh

Power Adapter

5V@3A 15W AC Power Adapter (option)

Mechanical & Environmental

Dimension

Main Tablet : 310 (W) x 187.2 (H) x 25.9 (D) mm

Dock Station : 220.5 (W) x 160.8 (H) x 125.8 (D) mm

Weight

Main Tablet : 0.95kg (w/o accessories)

Dock Station : 1.23kg (w/o power adapter)

Operation System

Windows 10 IoT Ent LTSB Entry EPKEA

Certification

CE / FCC Class B

Operation Condition

0°C to +40°C / 10 to 85% without condensation

Charging Condition

0°C to +40°C / 10 to 85% without condensation

Storage Condition

-10°C to +50°C / 10 to 85% without condensation

10.1 Inch Mobile Point of System

Quick Installation Guide

IMPORTANT SAFETY INFORMATION

 Read following instructions carefully.

 Use only parts, especially power adapter, recommended by the manufacturer;

unapproved parts may be hazardous.

 Make sure that the voltage applied to the power outlet is within the specified

range (100VAC ~240VAC). Improper power source voltage range will cause

damage.

 Power off the system and remove the power adapter while cleaning the system.

 Before powering on the system, make sure all the

peripherals are firmly installed.

MP-1311 is required to be charged over 8 hours

when used for the first time.

Ver. 1.0

Summary of content (3 pages)

PAGE 1
 MP-1311 Specifications Model Description MP-1311 10.1 Inch Mobile Point of System Main System Processor Intel Atom® x5-Z8350 Quad Core 1.44GHz, up to 1.92GHz Display Touch Panel True-Flat Projected-Capacitive Multi Touch (PCAP) Memory 4GB DDR3L 1600MHz Storage 64GB eMMC Micro-SD Slot Up to 128GB Communication Quick Installation Guide 10.1-inch IPS, 1280 x 800, 300nits Wi-Fi IEEE 802.11 b/g/n, Bluetooth and GPS Webcam 2M Front Camera (FF) and 5M Rear Camera (AF) Speaker 2 x 0.
PAGE 2
 Parts Descriptions A. Main Tablet MPOS Installation 1. Charge Your Tablet Power Volume Up / Down Button A. Power Adapter via Main Tablet Light Sensor B. Main Tablet via Charging Cradle LED Indicator Front Camera 5VDC Input MSR Alignment Mark 12VDC Input Pogo Pin (to Dock Station or Charging Cradle) Dock Station or Charging Cradle AC Power Adapter Finger Print 5VDC Input 2.
PAGE 3
FCC Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipmnet generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.