User Manual

to exchange
1.You can use USB cable to charge the charging case. The indicator light of charging
case will flash white while charging. Fully charged, the indicator light of charging case
will show solid if still connect with USB cable.
2.Please use factory certified charger and use the charger with output of DC5V/1A.
If you could not charge the charging case and earbuds, please confirm below items:
1.please try another USB cable and USB port.
2.Please confirm charging pins on earbuds and charging case are clean. If not clean,
please use cloth to wipe them.
3.Please try to push the earbuds into charging case in order to ensure charging pins
are connecting.
Charging Stylus
I
I
L
If you could not connect with your device, please confirm below items:
1. Please ensure the earbuds are fully charged;
2. Please ensure the earbuds are turned on and have enough power;
3. Please make sure the earbuds are not connecting with other devices;
4. Please ensure the bluetooth function device is turning on and can work properly.
5.Please ensure the earbuds are within connectable distance. Transmission distance:
10m (33FT).
If you still could not fix the problem, please try to reset them.
1.Take off plastic cover of two earbuds, which covers the charging pin.
2.Put two earbuds into charging case. The earbuds will be charged automatically
and the indicator lights will turn to white.
3.While in charging status, the white signal light will stay solid.
4.The white indicator lights would turn off when the earbuds are fully charged.
Previous Press control button twice
Volume+ Hold control button
Play/Pause Press control button once
Pick up phone Press control button once
Hang up phone Press control button once
Reject incalling Press control button twice
Long press Control Button for 5 seconds when your device
isn’t playing/ Put left earbud into charging case
Long press Control Button for 5 seconds when your device
isn’t playing/ Put left earbud into charging case
Version V5.0
Support A2DP,AVRCP,HFP,HSP
Transmission distance 10m
Frequency range 2.402GHz~2.480GHz
Hi-fi equipment Φ6mm*2
Impedance 16Ω
Standby time 70 hours
Talk time 6 hours
Listening time 6 hours
Earbud battery capacity 55mAh
Charging time 1 hour
Charging case battery capacity 600mAh
Charging case charging time About 1.5 hours
Weight(single earbud) 4.7g
While first use, please pair the earbuds as follows:
1.Take out two earbuds from the charging case and peel off the clear plastic covers on
two earbuds.
2.Put two earbuds into the charging case to charge and ensure two earbuds have power
(When earbuds have power, the indicator light of earbuds will show solid white light).
3.Take out two earbuds, they will turn on and prepare for pairing your device (When
pairing, the indicator light will flash blue and white alternately).
4.Turn on the Bluetooth function of your device and search [X8] to connect.
Control Button/Indicator light
Power on: Flash blue light one second on two earbuds
Power off: Flash white light one second on two earbuds
Pairing: Flash blue and white light automatically
Charging pins (Take off plastic covers on this place.)
Tips: In the first use, when two earbuds can’t pair , or there is no sound of one
earbud, please proceed as follows:
1.Turn off the Bluetooth function of your device. Turn off the earbuds by long press the
Control Button for 5 seconds when your device isn’t playing, and you would hear ‘power off’.
2.Hold the Control Buttons of two earbuds for 5 seconds at the same time and double
click the Control Buttons. And two earbuds will flash rapid blue light.
3.Wait about 5 seconds, two earbuds will enter pairing mode (the indicator will turn to
blue and white alternately).
4.Turn on the Bluetooth function of your device and search [X8] to connect.
As long as you don’t wear the earbuds while diving, you can wear them while you
taking shower or bath and swimming. Do not dip the earbuds under water.
1. Please do not use this product while diving as water will block the signal.
2. Do not use corrosive liquid to clean this product.
3. If this product is accidently exposed to chemicals, flush it with water.
4. Do not use this product under extreme circumstances for temperature
below -10° or above 60°.
5. To avoid exploration, do not throw this product into fire.
6. To avoid scratches, do not touch the earbuds with sharp objects.
7. Do not insert objects into the earbud, otherwise it would cause damage to
the internal components.
8. Do not disassemble the earbud.
9. In case the earbuds run out of battery, please charge the earbuds when it’s
out of use for more than a month.
10. Please do not charge the product with the power adapter of a current
greater than 2A. Excessive current flow could cause damage to the battery.
Triple-click the Control Button of one earbud to wake up SIRI. One-click the Control Button
of one earbud to turn off SIRI. This function only supports IOS system.
（Please take off plastic covers on two earbuds.）
1.Take out two earbuds, and they will turn on automatically. And you would hear ‘Power on’.
2.Press Control Button for 3 seconds. And you would hear ‘Power on’.
1.Put two earbuds into charging case and they will turn off automatically.
2.Long press the Control Button for 5 seconds when your device isn’t playing. And you
would hear ‘Power off’.
Please Reset two earbuds if above items could not help you or two earbuds can’t pair,
or there is no sound of one earbud, or one earbud keep flashing blue light .
1.Turn off the Bluetooth function of your device. And turn off the earbuds by long press
the Control Button for 5 seconds when your device isn’t playing, and you would hear
‘power off’.
2.Hold the Control Buttons of two earbuds for 5 seconds at the same time, then triple
click the Control Buttons rapidly. The indicator light will flash white for one second,
which means the earbuds have cleared the record and turn off.
3.Then take out two earbuds in the same time and put them back into charging case to
ensure two earbuds have power.
4.Take out two earbuds and two earbuds will be paired automatically.
5.After restore, delete [X8] on Bluetooth list of your device. Then research and
connect [X8] on the Bluetooth list.
Indicator lights of earbuds:
n
Pairing Issues:
Restore Factory Setting:
phone
phone
Next
Reject incalling
Press Control Button for 3 seconds/ Take left earbud out
Press Control Button for 3 seconds/ Take left earbud out
Press control button twice
Hold control button
Press control button once
Press control button once
Press control button once
Press control button once
Press control button once
X8
Facebook@FALWEDI STORE
[e-mail]