User's Instructions

ManualsBrandsFALTEC ManualsElectronicsRemote Transmitter

GENUINE REMOTE ENGINE START

USER’S INSTRUCTIONS

Parts number：BCKA V7 620

Thank you for purchasing a genuine Mazda accessory.

Before use, be sure to thoroughly read these instructions.

Please read the contents of this booklet in order to properly use the Remote Engine

Start. Your safety depends on it.

After using this instruction manual, store it in a place where it can be easily located.

Note, consult your authorized Mazda dealer, or a dealer appointed store, for proper

vehicle installation of the Remote Engine Start.

If the vehicle equipped with this product, or the product itself, is sold, transferred or

loaned to another party, be sure to give this instruction manual to the new owner, so he

or she can use this product safely and correctly.

Various warnings and cautions are displayed in this manual to assist you in the safe

and correct use of the product and as precautions against you or others being injured,

or the product being damaged.

Depending on the degree of possible injury or damage that may be incurred,

precautionary items have been divided into ‘Warnings’ and ‘Cautions’ and illustrated

with symbols to depict the nature of the precautionary content.

WARNING

A WARNING indicates a situation in which serious injury or

death could result if the warning is ignored.

A CAUTION indicates a situation in which bodily injury or

damage to objects, or both, could result if the caution is

ignored.

Always follow the ADVICE noted to ensure vehicle safety

and performance. Vehicle damage could result, or proper

performance may be compromised if the advice is ignored.

A NOTE indicates information or a point related to vehicle

usage. Vehicle damage could result, or proper

performance may be compromised if the note is ignored.

DVIC

CAUTION

NOTE

No.

ZZ092-00971

Summary of content (28 pages)

PAGE 1
GENUINE REMOTE ENGINE START USER’S INSTRUCTIONS Parts number：BCKA V7 620 Thank you for purchasing a genuine Mazda accessory. Before use, be sure to thoroughly read these instructions. Please read the contents of this booklet in order to properly use the Remote Engine Start. Your safety depends on it. After using this instruction manual, store it in a place where it can be easily located.
PAGE 2
CONTENTS 1. Remote Engine Start features ................................................................ 3 2. Safety precautions .................................................................................. 3 3. General information ................................................................................ 6 4. Operating precautions ............................................................................ 7 5. Part names .........................................................................
PAGE 3
1. Remote Engine Start features  The Remote Engine Start allows the user to start the engine of a vehicle from a remote location using a remote control.  The user can turn on the air conditioner / heater beforehand so the cabin of the vehicle can be cooled or heated ahead of time. 2. Safety precautions WARNING Do not install this device on a vehicle equipped with a manual transmission.  Only install this device on designated vehicles which the harness fits.
PAGE 4
WARNING Do not start up the engine using the Remote Engine Start when parked on an incline.  If the vehicle were to move unintentionally due to the engine vibration, jolt, etc., it could result in a serious accident. Performing safe maintenance and inspection.  When performing vehicle inspection and maintenance, remove the (-) terminal on the vehicle battery. Never start up the engine with the remote control during inspection or maintenance at a gas or service station, etc.
PAGE 5
WARNING Fire prevention.  Do not start the engine when the vehicle is near something flammable (oil or dry grass). Otherwise, the high temperature from the exhaust fumes or exhaust pipe could cause a fire.  Do not start the engine while the vehicle is wrapped with a body cover. Otherwise, the high temperature from the exhaust fumes or exhaust pipe could cause a fire. Do not pour water on the remote control.
PAGE 6
3. General information -Laws in some communities may restrict the use of remote starters. For example, some laws may require a person using the remote start to have the vehicle in view when doing so. Check local regulations for any requirements on remote starting of vehicles. -This device complies with part 15 of the FCC Rules and Innovation, Science and Economic Development Canada’s license-exempt RSSs.
PAGE 7
4. Operating precautions Usage Environment  The remote control signal (or the response signal from the controller) may not reach the controller (or the remote control) if there are strong radio waves transmitting nearby, or if there are obstacles blocking the signal.  The engine may be slow to start during severe cold weather conditions.
PAGE 8
Remote Control Handling Instructions The remote control is a sensitive electronic device similar to a cellular telephone. Please follow the handling instructions below to avoid damage to or breakdown of the remote control.  Avoid storing or using the remote control in places that expose it to direct sunlight,           places that have high humidity, places with extremely high temperatures (on top of the dashboard, etc.
PAGE 9
5. Part names ■ Remote Control CAUTION  Keep the remote control out of the reach of children. Otherwise, they may swallow the lithium battery accidentally and choke.  Do not drop the remote control or hit it against something hard. Otherwise, it can result in breakdown or malfunction.  Do not pour water on the remote control or submerge it. It can result in breakdown or malfunction.
PAGE 10
6. Basic functions for Remote Engine Start Engine Start & Stop Function The remote control is equipped with engine start, engine stop and automatic stop (set with timer) functions. In addition, the engine start operation will perform when conditions outlined on page 13 are satisfied. The air conditioner / heater can be turned on beforehand so the cabin of the vehicle can be cooled or heated ahead of time. Engine start → P.14 Engine stop → P.
PAGE 11
Car Find Function When using the remote control to carry out car find operations, the hazard warning lights will flash twice and the horn will sound twice to allow you to confirm the location of the vehicle. This function is useful for finding your vehicle in places such as large car parks. Answer Back Function This device conducts bidirectional communication between the remote control and the controller (vehicle side).
PAGE 12
7. Low battery warning & replacement directions If the battery power is depleted, the LED light (red) turns on when a switch is pressed and battery power depleted is indicated. In this case, as battery replacement will be required soon, replace the batteries with new ones according to the following procedure. Attach cellophane tape or similar as shown in the diagram to prevent the remote controller from becoming scratched.
PAGE 13
8. Basic operations Engine Start Conditions When using the Remote Engine Start, be sure to always check the start conditions listed below beforehand. Even if just one of the conditions has not been satisfied, the device will interpret this as a hazard and will not operate. Even if the user tries to operate the remote control, the engine will not start. The ignition switch is not at the ACC or ON position. All doors are closed all the way. The shift lever is in the “P” position.
PAGE 14
8-1. Engine start operation Operation Press F switch Indication Press START switch while LED light (green) is flashing (approx. 3 seconds) LED light color: Engine start Green  Press switches until sound is heard.  Release F switch when beep sound is heard Engine not started* or Red Communication error * Check "Engine Start Conditions" (P.13). ADVICE  After the engine start operation is initiated, the controller will automatically send an answer.
PAGE 15
8-2. Engine stop operation Operation Press F switch Indication Press STOP switch while LED light (green) is flashing (approx. 3 seconds) LED light color: Engine stop Green  Press switches until sound is heard.  Release F switch when beep sound is heard Engine not stopped* or Red Communication error * Radio signal from remote controller not received. Operate in reception range.
PAGE 16
8-3. Warm up time check Operation Press F switch Indication Press START switch while LED light (green) is flashing (approx. 3 seconds) LED light color: See table below  Press switches until sound is heard.  Release F switch when beep sound is heard The remaining time until the engine turns off automatically is indicated by the number of times the LED light flashes.
PAGE 17
8-4. Warm up time settings Operation . Press START switch and STOP switch at same time until LED light (green) flashes Press the START and STOP switches at the same time. Indication Press switch while LED light (green) flashes (approx. 3 seconds) For 10-minute warmup. For 30-minute warmup. LED light color 10 minutes Green [Beep] 30 minutes Green Green [Beep] [Beep]  Release switches when beep sound is heard.
PAGE 18
8-5. Engine start operation with rear defrost start Up When the engine is started using this operation, the rear defrost operates. Operation Indication Press F switch Press F switch while LED light (green) is flashing (approx. 3 seconds) Press START switch while LED light (green) is flashing (approx. 3 seconds) LED light color Green Engine start Engine not started* or Red Communication error  Press switches until sound is heard.  Release F switch when beep sound is heard.
PAGE 19
8-6. Car find function If this operation is carried out when the engine is stopped or after the engine has been started by remote control, the vehicle's hazard warning lights will flash twice and the horn will sound twice. Operation Indication Press F switch LED light color Press F switch while LED light (green) is flashing (approx. 3 seconds) Press START switch while LED light (green) is flashing (approx. 3 seconds) Car find operates Green Red  Press switches until sound is heard.
PAGE 20
9. Troubleshooting  Even if you think the device has broken down or malfunctioned, check once more to be sure.  If an error occurs, read through this instruction manual thoroughly, and check the following items in the table below. If the error or problem persists, do not try to repair the device by yourself. Consult with the authorized Mazda dealer where you purchased the vehicle or device.
PAGE 21
Problem The wipers do not operate when the engine is started with Remote Engine Start Engine does not stop using remote control Warm up time check does not work Engine is started, but remaining engine warm-up time is not displayed on the remote control.
PAGE 22
Problem Rear defrost does not operate by remote control operation The rear defrost turns on in spite of the "Engine start operation" shown in p.14.
PAGE 23
Problem Check Item Troubleshoot Remote control operating distance is short Have the batteries run out? Are you too far from the vehicle? Is there something blocking the signal between the remote control and the vehicle, such as a building? Engine not stopped or Have the batteries run car find not operated out? is displayed Are you too far from the vehicle? Is there something blocking the signal between the remote control and the vehicle, such as a building? If the remote controller operation was [Engine
PAGE 24
10. Servicing Servicing If you are having a problem with the device, first re-read this instruction manual again to troubleshoot the problem or issue. If the problem or issue does not improve, consult with the authorized Mazda dealer where you purchased the vehicle or device. If you lose the remote control, contact the authorized Mazda dealer where you purchased the vehicle or device. 11.
PAGE 25
MEMO 25
PAGE 26
MEMO 26
PAGE 27
MEMO 27
PAGE 28
Request for Dealer Performing Installation Service Be sure to explain the device operation to the customer. Quick Reference Manual ・To start the engine Press LED (green) illuminates Press Within 3 seconds ・To stop the engine Press Press LED (green) illuminates Within 3 seconds  Note that some contents of this instruction manual may not match the actual device due to changes in the vehicle or product specification.