THIS DOCUMENT IS AVAILABLE AT HTTP://WWW.FALCOM.DE/ . MAMBO2 Hardware manual Version: 1.0.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 Version history: This table provides a summary of the document revisions. Number Author 1.0.1 1.0.0 F. Beqiri F. Beqiri Changes - Added power consumption for different power modes. - Initial version. Modified 24/07/2009 30/05/2008 This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 Cautions Information furnished herein by FALCOM is believed to be accurate and reliable. However, no responsibility is assumed for its use. It is necessary to read this manual before you start using the device. Please, read carefully the safety precautions. If you have any technical questions regarding this document or the product described in it, please contact your vendor.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 Table of contents 1 INTRODUCTION.................................................................................5 1.1 1.2 1.3 1.4 General......................................................................................................................5 Audience...................................................................................................................6 Circuit concept..........................................................................
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 1 INTRODUCTION This product manual is only addressed to qualified personnel which is well skilled in electronical/electrical installation and not addressed to private consumers/end user. The installation, implementing or setting into operation of the product can only be performed by this qualified personnel.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 1.2 Audience This document is intended for system integrators and application developers. 1.3 Circuit concept The MAMBO2 architecture includes the following major functional components (a block diagram Fig.1 is available below): ARCHITECTURE INTEGRATES: High-performance Quad-Band GSM/GPRS core (operating at 26MHz), 20 parallel channel low-power GPS core (operating at L1 1575.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 1.4 Related documents Some others PDF documents such as FCC approval, application notes, Certificate of Conformity R&TTE etc. are available on the Web at: http://www.falcom.de/ in the published download area. In addition to this document, the following files comprise the full set of FALCOM MAMBO2 product manuals which are also available on the Web at: http://www.falcom.de/ in the protected download area.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 2 SECURITY IMPORTANT FOR THE EFFICIENT AND SAFE OPERATION OF YOUR GSM-MODEM, READ THIS INFORMATION BEFORE USE! Your cellular engine MAMBO2 is one of the most exciting and innovative electronic products ever developed. With it, you can stay in contact with your office, your home, emergency services and others, wherever service is provided. This chapter contains important information for the safe and reliable use of the MAMBO2 device.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 2.3 Driving Check the laws and regulations on the use of cellular devices in the area where you drive. Always obey them. Also, when using your MAMBO2 while driving, please pay full attention to driving, pull off the road and park before making or answering a call if driving conditions so require. When applications are prepared for mobile use, they should fulfil road-safety instructions of the current law! 2.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 2.10 Potentially explosive atmospheres Turn your MAMBO2 device OFF when in any area with a potentially explosive atmosphere. It is rare, but your modems or their accessories could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 charged is 0°C to 40°C. Charging is interrupted, if the ambient temperature is outside of this range. 2.11.2 Safety precautions while discharging the battery The temperature range over which the battery can be discharged is -20°C to 60°C. Use of the battery outside of this temperature range may damage the performance of the battery or may reduce its life expectancy.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 3 SAFETY STANDARDS Your GSM/GPRS/GPS device complies with all applicable RF safety standards. MAMBO2 meets the safety standards for RF receivers and the standards and recommendations for the protection of public exposure to RF electromagnetic energy established by government bodies and professional organizations, such as directives of the European Community, Directorate General V in matters of radio frequency electromagnetic energy.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 4 TECHNICAL DATA 4.1 Product features Input voltage: ➢ USB port voltage level: +5.0 V ± 10 % (max. 0,5A). ➢ Device is powered by a rechargeable 1300 mAh LiPolymer battery. ➢ Default operating time is user-application dependant. ➢ 4 different power-saving modes - programmable with PFAL commands. Battery: Power saving: Operating temperature range: ➢ -20 °C to + 60 °C (for more details, see chapter 4.1.2) Physical characteristics: ➢ Size: 54.0 ± 0.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 ➢ CSD dial-up data link, ➢ TCP communication by GPRS - IP based packet transfer, ➢ SMTP - Receive device location via Email. Hardware options: ➢ 3D motion sensor - already available in the standard hardware version, ➢ Micro-SD-Card Reader - for additional memory (up to 1GB Mini-SD cards support). ➢ Fully shielded in a plastic case. ➢ Internal. ➢ Fully type approved confirming with R&TTE directive, ➢ FCC / CE. ➢ RoHS compliant.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 4.1.1 Power consumption for MAMBO2 AVARAGE POWER CONSUMPTION (@ TAMB = 25 °C) Internal battery voltage between 3.9V to 4.0V STATE MODES by PFAL commands mA GSM GPS DISPLAY CPU PFAL,Sys.Power.Mode=auto,30 OFF OFF OFF ON 52 PFAL,Cnf.Set,DISP.SAVER=1,1 ON ON OFF ON 140 PFAL,Cnf.Set,DISP.SAVER=2,1 ON ON OFF ON 132 PFAL,Sys.Device.Shutdown OFF OFF OFF OFF 700 µA PFAL,Sys.Device.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 4.1.4 GSM/GPRS features GSM/GPRS core: Telit GE864-Quad module ➢ Quad-Band: GSM 850, 900, DCS 1800, PCS 1900. ➢ Compliant to GSM Phase 2/2+ ➢ Output power: Class 4 (2 W) at EGSM900/850 ➢ Class 1 (1 W) at GSM1800 and GSM 1900 ➢ GPRS connectivity: ➢ GPRS multi-slot class 10 ➢ GPRS mobile station class B DATA: GPRS ⇒ GPRS data downlink transfer: max. 85.6 kbps (see table 3). ➢ GPRS data uplink transfer: max. 42.8 kbps (see table 3).
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 4.1.5 GPS features GPS engine: ➢ JP18 FALCOM GPS receiver with the latest SiRFstarIII chip set. ➢ High sensitive 20 channel, L1 1575.42 MHz, C/A code 1,023 MHz chip rate. ➢ SiRF GSW3 ➢ Position accuracy: ➢ WGS-84. Accuracy: < 10 m Datum: Time to First Fix (TTFF): ➢ Hot start < 1 sec., average ➢ Cold start ➢ Tracking -159 dBm ➢ Altitude 18,000 meters (60,000 feet) max. ➢ Velocity < 515 m/s (1000 knots) max. ➢ Max.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 4.2 NMEA & FALCOM data message MAMBO2 delivers data in the NMEA-0183 format. Table 4 lists each of the NMEA and FALCOM output messages supported by the MAMBO2 terminal and a brief description. For further description about NMEA, see related documents [1]. The running firmware inside the device offers the possibility to switch on and off each protocol that is listed in table below.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 5 MAMBO2 APPLICATION INTERFACE 5.1 Power supply Your MAMBO is powered by a rechargeable Li-Polymer battery. The power supply to recharge the internal battery of the MAMBO2 unit is drown from a valid USB port source which complies exactly with the USB standard. A compliant USB host source is specified to supply no more than 500 mA. The USB voltage is used to charge the internal battery.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 5.2 Function parts of device Figure 2: Parts of the MAMBO2 The pinout of the 5 pin mini-USB jack connector on the MAMBO2 device: Figure 2.1: 5 pin mini-USB jack connector PIN NAME DESCRIPTION 1 VCC + 5 VDC 2 D- Data - 3 D+ Data + X NC - 4 GND Ground Table 5: The pinout of the 5 pin mini-USB jack connector This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 5.3 Getting Started To get started with MAMBO2 device you need to have a valid SIM card and it needs to support SMS, data services. Next is the configuration of the MAMBO2. For more details how to configure your MAMBO2 and pull its current configuration, refer to the manual “Mambo2PFALConfigurationReferenceGuide.pdf”. The principle of MAMBO2 operation is explained in Chapter 5.3.1.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 6 RF EXPOSURES This device contains 850/900/1800/1900 MHz GSM/GPRS functions that operational in these frequencies respectively. is The MAMBO2 device contains 1800 MHz GSM functions that are not operational and must not be used in U.S. Territories. Filing is only applicable for 850MHz GSM/1900 MHz PCS operations, whereby only these frequencies (850MHz GSM/1900 MHz PCS) are possible to be used in U.S. Territories.
MAMBO2 HARDWARE MANUAL VERSION 1.0.1 7 STATEMENTS ACCORDING TO FCC Statement according to FCC part 15.19: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • this device may not cause harmful interference, and • this device must accept any interference received, including interference that may cause undesired operation. Statement according to FCC part 15.
