User Manual

TV
®
OFF
DUSK + 5 HRS
ON
1
!
2
3
Instructions
1. Aim the FakeTV unit at translucent
shades, curtains, or blinds. Position
FakeTV so that it lets the light out, but
you cannot see the FakeTV unit from
outside. If you are using FakeTV on an
upper floor you can use it without
blinds. Plug the AC adapter into the
FakeTV unit, and into an outlet.
2. Place the switch in the DUSK + 5
HRS position. One dimly lit green LED
indicates FakeTV is getting power.
When it becomes dusk outside, and
thus dark in the room
Alternatively, you can give the
appearance of a television left on all the
time by leaving the FakeTV switch in
the “ON” position. If you wish to have
the FakeTV on at times other than
those provided by the light sensor, turn
the FakeTV unit to “ON” and plug the
AC adapter into an external timer.
3. Avoid these mistakes: The FakeTV
unit must not be directly visible from
outside the house. Do not use FakeTV
with a window that is too well lit with
exterior lighting. Do not put a light on a
timer or any other light source in the
same room with FakeTV.
(0.5 lux, or almost
pitch black), the FakeTV LEDs will turn
on to simulate televison. FakeTV will
then run for about five hours before
shutting off again. The following
evening, FakeTV will turn on again.
www.FakeTV.com
TV
®
Burglar Deterrent
Model FTV-7-US

Summary of content (2 pages)