www.ezvizlife.
COPYRIGHT ©2018 Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries. ALL RIGHTS RESERVED. About this Manual The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the ™ website (http://www.ezvizlife.com).
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
Box Content Camera (x1) Base (x1) Power Adapter (x1) Screw Kit (x1) Drill Template (x1) Waterproof Kit (x1) Quick Start Guide (x1) Basics Lens IR Light LED Indicator (Inside) 6
Network Interface Power Supply RESET Button microSD Card Slot Name Description IR Light Auto light source for dark environment. The camera video has two modes: color (for daylight recording) and black and white with IR illuminator (for night condition). LED Indicator • • • • • • microSD Card • Recommended compatibility: Class 10, Max.128GB. • Initialize the card in the EZVIZ app before using it. RESET Button Hold for 5 seconds to restart and reset all parameters to default.
Operations Step 1 Power-on Option 1 Power on the device by connecting to the power outlet by a power cable. Option 2 Power on the device by PoE switch (Purchased Separately).
Step 2 Camera Setup 1 Create an user account 2 Add a camera to EZVIZ - Connect your mobile phone to Wi-Fi. - Download and install the EZVIZ app by searching “EZVIZ” in App Store or Google PlayTM. - Launch the app and register for an EZVIZ user account following the start-up wizard. - Log into the EZVIZ app. - In the Home screen, tap “+” on the upper-right corner to continue. - Scan the QR Code on the cover of this manual or on the body of the camera.
Step 3 Mounting (Optional) The camera can be mounted on the wall or ceiling. Here we take wall mounting as an example. Make sure the wall/ceiling is strong enough to withstand three times the weight of the camera and the mounting. 1 Install the mounting template - Place drill template onto the surface you have chosen to mount the camera. - (For the cement wall/ceiling only) Drill screw holes according to the template, and insert three expansion screws.
2 Install the Camera Mount the camera to the mounting plate. Turn it clockwise until it is fixed. For side wiring 2 Rotate camera as shown in the figure. 1 For top wiring 2 1 4 Rotate camera as shown in the figure.
3 Installing the waterproof kit (Optional) If the camera is installed outdoors or in the humid environment, please use the waterproof kit. Cut off one side of the network cable (A). Put the A side through the gasket and the encap. Connect a new network plug with the cable (A). Insert the gasket to the network interface. Insert the network plug into the network interface of the camera. Insert the gasket into the encap, and tighten up the encap and lock nut.
4 Adjusting the Surveillance Angle 1 Turn the camera as shown in the figure. 2 Loosen the rotary knob. 3 Adjust angle 4 Tighten the rotary knob. For detailed information, please refer to www.ezvizlife.com.