User's Manual

ManualsBrandsEZVIZ ManualsCamera & PhotoSmart Home Camera

Any and all information, including, among others, wordings, pictures, graphs are the

properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”).

This user manual (hereinafter referred to as “the Manual”) cannot be reproduced,

changed, translated, or distributed, partially or wholly, by any means, without the

prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make

any warranties, guarantees or representations, express or implied, regarding to the

Manual.

The Manual includes instructions for using and managing the product. Pictures,

charts, images and all other information hereinafter are for description and

explanation only. The information contained in the Manual is subject to change,

version in the ™ website (http://www.ezvizlife.com).

New release – January, 2019

™, ™, and other EZVIZ’s trademarks and logos are the properties of

EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the

properties of their respective owners.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED

“AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-

INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS,

OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,

CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG

OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,

OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS

PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL

EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE

Summary of content (11 pages)

PAGE 1
COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd.. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”). This user manual (hereinafter referred to as “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of EZVIZ.
PAGE 2
PRICE OF THE PRODUCT. EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG OTHERS.
PAGE 3
Camera Base Screw Kit Drill Template Power Cable Power Adapter Regulatory Information Quick Start Guide 1
PAGE 4
Micro SD Card Slot Reset Button LED Indicator MIC Name LED Indicator Description Solid Red: Camera starting up. error). Micro SD Card (sold separately) Initialize the card in the EZVIZ app before using it. Reset Button Hold for 5 seconds to restart and set all parameters to default. MIC For audio in. Speaker For audio out.
PAGE 5
Speaker Ethernet Port Power Port Plug the power cable into the camera, and then plug the power adapter into Power Outlet Power Cable 3
PAGE 6
1. Create a user account Connect your mobile phone to Wi-Fi using your 2.4GHz network. Search for "EZVIZ" in the App Store or Google Play Store(TM). Download and install the EZVIZ app. Launch the app. Create and register an EZVIZ user account by following the start-up wizard. 2. Add a camera to EZVIZ Log in to your account using the EZVIZ app. On the Home screen, tap “+” on the upper-right corner to go to the Scan QR Code interface. Scan the QR code on the bottom of the camera.
PAGE 7
1. Rotate the sphere upwards until you see the card slot. 2. Insert the Micro SD card (sold separately) into the card slot as shown in This Side Up After installing the Micro SD card, you should initialize the card in the EZVIZ app before using it. 3. In the EZVIZ app, tap the check the SD card status. in the Device Settings interface to 4. If the memory card status displays as The status will then change to pictures. 5 , tap to initialize it.
PAGE 8
The camera can be placed horizontally or mounted on the ceiling. Here we take ceiling mounting as an example. Make sure the ceiling is strong enough to withstand three times the weight of the camera. Avoid positioning the camera in an area that gets a lot of light shining directly into the camera lens. Place the drill template onto the surface you have chosen to mount the camera. (For cement wall/ceiling only) Drill screw holes according to the template, and insert three anchors.
PAGE 9
image. For detailed information, please visit 7 .
PAGE 10
Regulatory Information This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union.
PAGE 11
Use only power adapters listed in the Table. Adapter manufacture Adapter model ADS-5RE-06 05050EPCU/EPC(US), ADS-5RH-06 05050EPB(UK), ADS-5RH-06 05050EPG(EU), ADS-5RH-06 05050EPSA(AU), ADS-5RH-06 05050EPBR(BR), ADS-5RH-06 05050EPI(IN), ADS-5MA-06A 05050GPK(KR) DYS05100CP-U, DYS05100CP-E A 5V1A adapter is recommended, if the power adapter is not included in the package. Shenzhen Honor Electronic Co., Ltd Sichuan Jiuzhou Electronic Technology Co.