User's Manual

⑧
⑨
⑩
11
WIRELESS CHARGER MUSIC LAMP
Simple and exquisite shape
Mobile phone stand function
Adjustable bracket
Wireless charging distance
≤8 mm/0.315in
Wireless quick charging
Wireless speaker
Hands-free call
Product features
User Manual
11
①Touch light
②Function keys
③Wireless speaker indicator
light (blue)
④Wireless charging indicator
light (white)
⑤Aluminum frame
⑥Lamp shade
⑦Battery charging indicator
light (red)
⑧Type-C interface
⑨Power indicator light (white)
⑩Speaker cavity
Silicone anti-slip pad
Get to know your product
Get started
1.Connect the USB port of the USB power cable to the
power adapter and the Туре-С end to the product.
2.After the product is powered on, its white indicator
light lights up constantly.
3.Place a device to be charged on the indicated charging
area of the product. The product gives a positive sound
and the wireless charging indicator light flashes,
indicating wireless charging is started.
How to use
The first touch will turn on the light
to the first level brightness, i.e., 30%.
The second touch will make the light
brightness to reach 70%.
The third touch will make the light
brightness to reach 100%.
The fourth touch will turn off the light.
The above are cycled in turn.
Touch light
Wireless speaker
In the power-off state, press the power switch ▷ for about 3
seconds. When there is a prompt sound, it indicates that the
speaker has been powered on, and the constantly flashing
wireless speaker indicator light indicates that the speaker is
searching for pairing.At this moment, you can turn on the
BT function of your mobile phone. When you search for the
wireless speaker, the text “EZVALO Lydia Pro” will appear,
please select the device to pair automatically the mobile
phone requires a PIN code, please enter 0000 (four zeros) to
confirm pairing. After the successful pairing, there will be a
prompt sound and the indicator light will stop flashing.
If the pairing is not successful after more than 10 minutes,
the wireless speaker indicator light will stop flashing. At this
moment, the speaker automatically enters the sleep state.
For some mobile phones, after the pairing is completed,
you have to manually connect to the wireless device.
If after connection, there is no sound during music playing,
please press the icon on the right of “Paired device EZVALO
Lydia Pro” to enter the corresponding interface and check
the option “Media audio”.
Attention
Specification
FCC statement
Accessories
+ Volume plus / Next track
- Volume minus / Previous track
This product supports wireless quick charging function,
and it realizes short-distance wireless transmission of
electric energy through magnetic induction mode. The
product supports all wireless charged devices conforming
to the QI standard. When an adapter with output of 5V is
used, the wireless charger supports 5W load. When an
adapter conforming to the standard QC 2.0 or above is
used, the wireless charger supports 10W load. The product
is provided with overcharge protection, overvoltage
protection (9V) and overcurrent protection (2A).
Do not use or store this product for a long time in a place
with direct sunlight or high temperature.
Do not carry out charging in a place too close to a magnetic
card, magnetic recording media or precision instrument.
Do not disassemble or alter this product.
Do not touch the AC adapter with wet hands.
Please keep this product away from water or other liquid.
If you want to clean this product, please cut off the power.
The operating environmental temperature range for this
product: 0-45°C / 32-113℉.
Do not use this product on an inclined plane over 6°.
Do not use mobile phone with metal protection case for
wireless charging; otherwise, abnormal heating will occur.
Please use power adapters passing corresponding
certification.
Product name: Wireless Charger Music Lamp
Product model number: LYYD02
Product dimensions: 191 x203x55 mm /7.5×8×2.17in
Product materials: ABS + PP + metals
Input: 5V 2A, wireless charging output: 5W MAX
Input: 9V 2A, wireless charging output: 10W MAX
The power charging port is international universal
Type-C port.
This equipment has been tested and found to comply withthe
limits for a Class B digital device, pursuant to part 15 and18 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
Speaker power: 4Ω5W
Speaker size: 50mm /1.97in
Built-in battery: 1800mAh/3.7V
Wireless connection distance: ≤10m / 32.8ft
USB power cable *1
User manual *1
In the playing state, you can click the button repeatedly to
increase the volume. When the volume is increased to its
maximum, a prompt sound will be given. If you press and
hold the button for several seconds, the next track will be
played.
In the playing state, you can click the button repeatedly
to decrease the volume. If you press and hold the button
for several seconds, the previous track will be played.
When the product is about to run out of power, it will give
a low battery warning. Please charge the product as soon
as possible.
Applicable devices
Intelligently identify the charged devices: Compatible
with the mobile phone devices of various major brands,
which conform to the QI standard;
Apple: iPhoneX iPhoneXR iPhoneXS iPhoneXSMax
Samsung: GalaxyS6 GalaxyS7 GalaxyS8 GalaxyS9 Note8 Note9
Huawei: Mate RS Mate 20 Pro Mate 20 RS РЗ0Рго
Xiaomi: MIX2S MIX3
(The above are a part of mainstream devices)
Note:
Low voltage prompt
Function keys
▷Power switch/Play/Pause/Hands-free call/
Wireless speaker pairing
If you press and hold the button for 3 seconds, the product
will be powered on. If you click the button, the music playing
will pause, and if you click again, the playing will resume.
When a call is incoming, you can click the button to receive
the call, or you can press and hold the button for 3 seconds
to reject the call. In the power-on state, you can double click
the button to disconnect the existing wireless connection
and enter the wireless pairing mode.
Wireless charging
When your mobile phone is placed, the device will give a
positive sound, which indicates the start of charging.
After you take your mobile phone away from the charging
area, if you put it back within 3 seconds, the device may
judge that it is disconnected only for a short time and may
not give a positive sound again.
If there is metal foreign matter placed on the charging area,
the device will give a negative sound as alarm. At this
moment, the wireless charging function stops, and the
foreign matter needs to be taken away.
Note:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not
explicitly approved by manufacturer could void your
authority to operate this equipment.
This device complies with part 15 and 18 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may notcause harmful interference, and (2) this device
must accept anyinterference received, including interference
that may causeundesired operation.
FOR BT
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
FOR wireless charger
The equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. During
the operation of device a distance of 15 cm surrounding
the device and 20 cm above the top surface of the device must
be respected.