Report No: BWS-03-EF-0026 FCC ID Q9JEZMP-2000 Date of Test : Jun 14, 2003 Appendix 6. User Manual Refer t o t he following pages EZMAX Co. , Ltd.
(N.B.) C opyright © 2003 by EZMAX C o., Ltd. All rights reserved. The use of user's manual, pic tures, software and other related doc uments of this produc t requires the prior permission of EZMAX, whose violation would be followed by a legal ac tion or suit. The c ontent of user's manual are subjec t to c hange without any prior notic e due to improvements in the produc t. EX M AX CO., LT D. http://www.ezmax.co.
Features Thank you for purchasing this product. Make sure to use it after carefully reading the user's manual. This device is small, light and easy to carry, and plays digital music that meets MP3 and WMA standards. This device has been so improved that It could last for 40 hours with only one small battery (AAA battery). In addition, it adopts JOG button to easily use various functions and enables the user to upgrade the functions without any inconvenience of visiting A/S center in person.
Contents Getting Started 1. What's in the box .............. 3 2. PC System Requirements .. 4 3. Cautions for Safety ............. 5 4. Set Equalizer ...................... 16 5. Set Play Order/Delete File .. 17 6. Format Flash Memory ....... 18 How to Use MP3 Player 1. Power ON / Play ................. 19 2. Power OFF / Pause ............ 20 3. Volume Control ................... 21 4. Select Next/Previous Track 22 5. Menu Mode ........................ 23 6. How to Insert Battery ..........
1 What's in the box MP3 Player USB Cable Necklace Earphone Install Program CD 3 User’s Manual AAA Size Battery
1 2. PC System Requirements There are basic requirements for PC to install software and use mp3 player. Make sure to check recommendations before use.
1 3. Cautions for Safety For Listening to Music Output level of this equipment guarantees quality sound at its middle volume. Since listening at its high volume for a long time may cause a serious damage to your hearing sense, listen at its proper volume. Keep away from Strong Impact or Vibration. Giving impact to or felling the main product or accessories on the floor may give a severe damage to the player.
2 1. Name of Parts 1. Earphone Jack 2. USB Port 3. Necklace connection hole 4. Operation Status LCD window 5. MENU Switch 6. Power( on/off /Play/Stop) button 7. Volume button 8.
2 2. Name of LCD Window Display 1. Name of song selected or in play. 2. Progress status ( ▶ : Play / ■ : Pause / : Fast Forward 3.
3 1. Install Manager Program To install manager program, make sure that USB cable isn’t connected to PC while you follow the steps below Insert Install CD into CD-ROM drive, and the following screen will appear and installing will start. (This explanation is an example> of WIN XP. If you are a user of other OS, visit and refer to our website. ) ! Note: Insert install CD into CD-ROM drive only when you install program at the beginning, and then remove it after installing is finished.
3 1. Install Manager Program 3) Enter user information and 4) Click the “Next” button. then click the "Next" button. 6) Click the “Finish” button. 5) Click the “Next” button.
3 2. How to Connect Player to PC To download MP3 file from PC, you should use USB cable to connect PC USB PORT and MP3 player. ( You should use USB cable provided when you purchase EZMP-2000. ) 1) Connect the rectangle end of Universal Series Bus (USB) cable to USB port of PC. 2) Connect the square end of Universal Series Bus (USB) cable to USB port connection part of player. ! Note: Separate earphone from MP Player when you download or upload. Turn off MP3 and remove the battery.
3 3. Install USB Driver The following explanation is an example> of WIN98. Since different figures may appear depending on OS of user PC, visit our website and find appropriate information. 1) Connect USB cable to MP3 player and USB port. 2) A message “New Hardware Found” automatically appears on PC screen. 3) If a message "(Unknown) ‘EZMAX01.sys’ file is required" appears, set the path as shown in the figure and check.
3 3. Install USB Driver 4) When you press the "Finish" button after file is copied, installing USB driver is finished. 5) To check whether USB driver is properly set, double-click the "System" icon in [Start] [Setting] - [Control Panel]. Click “Device Manager” Tab and click "+" of “Universal Series Bus (USB)” controller. !Note: When “EZMAX MP3 Player” appears, driver is successfully installed.
4 1. Description of Manager Screen Click the [ezMAX] icon on the desktop or click [Start] [Program] [ezMAX] to execute program. When MP3 player is connected with USB connection cable, it automatically reads the memory and displays the files on the screen displaying the memory..
4 2. Download(Transmit Music 1) Click the “View Music File” icon ( F ile from PC to MP3 Player) ) in the menu bar. 2) Select [File]→[Download] in the menu bar. 3) Find the directory where MP3 / WMA file is located and select the file you want. 4) Click the [Open] button to copy the file to the player. (Select it with a mouse and drag it to the manager window.) !Note: MP3 / WMA file downloaded from Music Mode is prohibited from being upload by law.
4 3. S ave F ile You can save files(Ex. extension file, bmp, doc, zip, etc.) in the internal memory of MP3 Player without mobile storage device. 1) Click the "View File" icon ( ) in the menu bar. 2) Right-click the mouse, select “Download”, and then save the file you want to save from computer to MP3 Player. To the contrary, if you want to transmit files in MP3 player to the computer, select “Upload” and transmit the file to the computer.
4 4. S et E qualizer 1) Select Tool Equalizer in the menu bar. In Equalizer window, you can set various types of sounds such as TREBLE, BASS and DBB and save it in the name you want in the EDIT window. (The following example shows that user sets TREBLE, BASS and DBB in the EDIT window, and saves in the name of “User Mode 1”.) 2) You can select each type you set in TYPE-1, TYPE-2, TYPE-3, TYPE4, TYPE-5 window as shown above to set the Equalizer you want.
4 5. S et Play Order and Delete 1) Set Play Order : Select the file you want and then click " menu bar. 2) Delete MP3 / WMA File : Select the file you want and click " " or " " in the menu bar.
4 6. F ormat F lash Memory All files(MP3/WMA file, effect sound setting file and other files saved by user) are all deleted when you select Format button( the file you want and click " ). If you delete MP3 file alone, select " button. If you want to initialize all memory, or manager program cannot recognize MP3 player, initialize memory with ( ) button. There are 2 kinds of format such as Fast Format and Format All. It supports fast format by default.
5 1. Power ON / Play Power ON / Play( MP3, WMA ) If you press [POWER button] a little long, power will be turned on and automatically play music under the same as the environment where the previous music played(sound quality, music to be played, play mode, etc...). If you press [Power button] again in Pause status, Play[ ▶ ] will start. ! Note: Play(Power ON) does not work, if there is no song downloaded in the memory.
5 2. Power OF F / Pause Power OFF / Pause If you press [POWER button] a little long, power will be turned off. At this time, the environment is saved inside and will be applied when power is turned on in the next time. If you press [POWER button] while a file is played, it will become Pause ( ■ ) status. If you press [POWER button] again in Pause status, it will start playing [ ▶ ] again. ! Note: If there is no key operation for over 30 seconds in PAUSE status, power will be automatically turned off.
5 3. Volume C ontrol 1) Volume Up Press [ status. + ] button to volume up while a file is in play(stop) - ] button to volume down while a file is in play(stop) 2) Volume Down Press [ status. ! Note: Volume consists of a total of 20 stages.
5 4. S elec t Next/Previous Trac k(F ast F orward/Rewind) 1) Select Next Track (Fast Forward ) To select the next track, push it to [ ] direction while it is played. If you want to fast-forward, press [ ] a little long to select fast forward while it is played. At this time, effect sound you selected in Manager Program will come out. 2) Select Previous Track ( Rewind ) To select the previous track, push it as in the direction of [ ] while it is played.
5 5. ME NU MODE The following functions are in menu mode. If you press the MENU switch in the direction of the arrow as shown in the figure while it is in Play(Stop) status, the following screen will appear. Underline displays Progress(Selection) status.
5 2) 5. ME NU MODE EQ Mode ( Default Setting : TYPE-1 ) You can save 5 types such that users could select one of them they want. ! Note: Users can directly enter each type at Edit window of Manager Program by adjusting TREBLE, BASS and DBB3. Each type is selected whenever pressing EQ switch. (Refer to 4-5.
5 3) 5. ME NU MODE RESUME Mode ( Default Setting : TRACK ) : Listen from the song played last : Listen from the first song in the music file list : Listen from the beginning of the song played last. 4) SCROLL Mode ( Default Setting : LEV-3 ) It is to adjust the screen moving speed of LCD window. “LEV-1” is slowest and “LEV-5” is fastest.
5 5) 5. ME NU MODE POWER Mode ( Default Setting : NORMAL ) :Operation status is always displayed on the LC D window. :LCD screen is turned off in 30 seconds after the last Key is input., when the next key is entered, operation status will be displayed on the LCD window. . ! Note: If you set the POWER mode to “saving”, you can use battery longer 6) CONTRAST Mode ( Default Setting : LEV-3 ) It is to adjust operation status brightness(contrast) of the LCD window.
5 7) 5. ME NU MODE LIGHT Mode ( Default Setting : NORMAL ) : Light is turned on for 10 seconds and off, after the last Key is input : Light On/Off repeats itself at the interval of 1 second. : Always Light On : Always Light Off 8) KEY-MODE Mode ( Default Setting : MUSIC ) : Music Listening Mode : This mode supports block repetition.
5 9) 5. ME NU MODE VERSION Mode Display the c urrent version of F irmware 10) KEY LOCK Mode If you push the Menu button for a few seconds, all the keys is locked. If you push another time, they're unlocked.
5 6. How to Insert Battery Open the battery cover and insert a “AAA” battery in accordance with its proper polarity [ + ], [ - ].
6 1. Troubleshooting Check the followings if any problem occurs when you use products. Key does not work? ·Check”+”, “-” polarity of battery. ·Check the remaining level of battery. Cannot be downloaded? ·Check whether USB cable is properly connected between player and PC. ·Check whether USB driver is properly installed. ·Check whether empty space of memory is sufficient.
6 2. S pec ific ation Memory Capacity PC Interface Maximum speed of file transmission DISPLAY Power Maximum output of earphone Signal to Noise ratio Battery Range of frequency Distortion ratio Weight Maximum time of continuous usage Dimension Responding music format Internal memory 64MB/128MB/256MB USB 1.1 4Mbps LED BACKLIGHTING GRAPHIC LCD DC 1.5V 4mW + 4mW (16Ω) > 85dB AAA size x 1 20Hz ~ 20kHz < 0.1% 22.5g (Excluding battery) About 40 hours 28 (Width) x 83(Length) x 19.
6 3. MP3 / WMA Responding Music F ormat 1) MPEG1, MPEG2, MPEG2.5 ( all sampling frequencies, all bit rates ) 2) WMA ( High Rate defined by Microsoft ) Sampling Frequency Bit rate (bps) 48 kHz 128k, 160k, 192k 44.1 kHz 48k, 64k, 80k, 96k, 128k, 160k, 192k 32 kHz 48k, 64k 22.
6 4. S ervic e Information (A/S ) If you want latest information about updated Manager or MP3 player, visit our website. Homepage: www.ezmax.co.kr Address : # 302, Keumbong Techno Valley, 59-3 Dangjeong-dong, Gunpo city, Gyeonggi-do Tel : 031-457-9184 Fax : 031-457-9187 e-mail : webmaster@ezmax.co.kr ! Note: If you want A/S due to some breakdown, you can visit our main office and receive it, or send mail(registered mail and home delivery). But, please note that we cannot give receiver-pay service.
Warranty We hereby certify as follows: 1. This product is manufactured through strict quality control and inspection process. 2. You can receive free A/S for 1 year after purchase if the product with warranty period is out of order. (If it falls under the case of paid service in this written warranty even if it is within warranty period, you should pay.) 3. This warranty is domestically valid. 4. Make sure to present this warranty if this product requires repair. 5.
NOTICES TO USER This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.