V3 EZCast Beam V3 Quick Start Guide This EZCast Beam V3 Quick Start Guide provides a guideline for basic operation. Please read the guide thoroughly before operating the projector. Visit www.EZCast.com for additional information. Product information is subject to change without prior notice.
Thank you for purchasing the EZCast Beam V3 projector. Our product combines the easy to use interface, portability, and cross platform compatibility, to let you enjoy projecting media from Android, iOS phones and tablets, as well as Windows and MacOS laptops, anytime, anywhere. EZCast app installation Please visit www.EZCast.com/app to download EZCast app for every supported platform. Mobile devices can proceed to the relevant download area by scanning the QR code below.
Precautions How to use the projector 1. Do not turn the lens toward human eyes when in operation, to avoid damaging the eyes caused by the high intensity light source. 2. Do not block the device ventilation to avoid damage to the internal electronic devices due to overheating. 3. Do not use chemicals, cleaning agents or clean water to clean the device, and prevent rain water, moisture and mineral-containing liquids from corroding circuit boards. 4.
EZCast Beam V3 body and remote DC Mobile Stand Control Panel Focus Ring Wireless Kit USB HDMI Headset Jack Micro SD Remote Sensor Ventilation Lens (Do not block) Power Speaker mode Home Arrows Volume down OK Home Power Select Select Arrows OK Back Volume up Settings Back Settings
How to set up EZCast Beam V3 projector HDMI DC Wireless Adapter Ventilation (Do not block) Preparation 1. Plug the power to the projector, and the power button will light up. 2. Insert the wireless adapter into the wireless kit port of the projector. 3. To turn on projector, hold the power button of the projector for 3 seconds till you hear the "beep” sound and the light will turn blue. 4. Adjust focus ring until the projection image is clear and focused. Projector stand and holders 1.
First time settings 1.Select the start-up language. 2. Wi-Fi setting: connect the projector to your router and enter the password. (Important) 3. After starting up, enter the main menu and select the functions by arrow keys on the projector or remote control: Android, iOS, MacOS, Windows, bluetooth, EZCast, Multimedia, HDMI, and Setting, as below shown: Power off: 1. Sleeping mode: press the power button and hear the “beep” sound with the power button still blue. 2.
Settings Select the "Setting" key on the projector or remote control, and press "OK" to confirm. 1. Wi-Fi setting : Select the "Wi-Fi setting" menu and enter the Wi-Fi setting interface, select the "Internet", press "OK" key to confirm, and select the router from AP list and enter the password. 2. Display mode: Swtich standard/ ECO/ bright mode. 3. Portrait mode: Switch on to project vertically. Please (V. Keystone) make sure NOT to block the ventilation. 4. V.
How to Plug and Play (via USB cable) Android 1. Select the Android on main menu of projector, and then select Plug and Play menu by pressing "OK" key. 2. Connect your mobile to the projector via mobile USB data cable. 3. Download and install EZCast app from Google Play Store or scan the QR code shown on screen. 4. Launch EZCast App and follow the guide. If the guide doesn’t pop out, click at the upper right and click “+” at the upper left. 5. Press and scan the QRCode on your screen. 6.
Windows 1. Select Windows on main menu of projector, and then select Plug and Play menu by pressing"OK" key. 2. Install EZCast app on your PC. Please visit https://www.ezcast.com/app to download EZCast app. 3. Connect your PC to the projector via USB A-to-A cable. 4. Launch EZcast app on your PC and click icon. 5. Find and select "Beam-XXXX" from “Search device”, and click to mirror. MacOS 1. Select MacOS on main menu of projector, and then select Plug and Play menu by pressing "OK" key. 2.
How to Wireless Display Android 1. Select Android on main menu of projector, and then select Wireless menu by pressing "OK" key. 2. Select mirroring function in the setting of your phone and find”Beam-XXXX” device shown on device list to start your mirroring. Note 1: The naming of mirroring function varies different brands. Visit https://www.ezcast.com/usage/android/ezmirror for demos. Note 2: Compatibility: Android 5.0 or above. iOS 1.
Windows 10 1. Select Windows on main menu of projector, and then select Wireless menu by pressing "OK" key. 2. Make sure both of your projector and computer are connected to the same Wi-Fi router. + P/ K 3. Click quick key by on the computer, and connect to the device named by “Beam-XXXX” to start your projection. Note: Please upgrade your windows 10’s operation system to the lastest version. MacOS (1) Select MacOS on main menu of projector, and then select Wireless menu by pressing "OK" key.
Google Home Screen Mirroring (Android Only) 1. Select Android on main menu of projector, and then select Google Home menu by pressing "OK" key 2. Make sure both of your projector and mobile are connected to the same WiFi router 3. Download and install Google Home app from Google Play Store. 4. Launch Google Home app and choose device name: Beam-xxxx > Cast my screen > Cast screen Bluetooth Select “bluetooth” to use Beam V3 as a bluetooth speaker.
EZCast (1) Select EZCast on main menu of projector and make sure both of your projector and mobile are connected to the same Wi-Fi router. (2) Install EZCast app on your device. Please download the app from application market for your mobiles or visit https://www.ezcast.com/app to download EZCastapp for PC. (3) Launch EZCast app on your device, and then click icon and select the ”Beam-XXXX” shown on the list to start your projection.
FAQ Problems Solutions No electricity/can't power on 1. Check whether the power cord is connected properly. 2. Press the Power button for 3 seconds till you hear the "beeping" sound, and then release the button and wait for the projector to start up. Unable to screen mirroring 1. Make sure wireless adapter has been installed to wireless kit port on the projector. 2. Refer to the Quick Guide to make sure you are using the correct screen mirroring function. 3.
Warranty 1. The defective product is valid for refund and replacement if claimed with proof of purchase and warranty card within 7 days of purchase, and the defect was not caused by inappropriate usage or mishandling of product. 2. Product warranty is limited to 12 months within the purchase date, and covers the main projector only. The warranty does not cover accessories and defects caused by inappropriate usage or mishandling of product.