ezcap221 Audi udioDigiBT m manual
Thanks for purchasing ezcap221AudioDigiBT Audio Bluetooth Recorder. Please read this manual before use and keep it in a safe place for future reference. You can use this device: - Recorder audio from Bluetooth or Audio line input to digital mp3 files and save in Micro SD card or USB drive. - Play music through Bluetooth, Audio line input, Micro SD card or USB drive.
1, Speaker–With With speaker inside, can listen music directly. 2, –POWER button: keep press to switch on, keep press again to switch off. MODE button: press to switch between Bluetooth and Line in play and record mode (RECORD RECORD MODE MODE) and USB drive and Micro SD card play mode (PLAYBACK MODE). 3, –Blue Blue Bluetooth indicator LED. Fast flash flash: Bluetooth pairing. On: Bluetooth paired successfully. Slow flash: Bluetooth playback. 4, –PREVIOUS button, press to play previous music file.
5, –NEXT button, press to play next music file. 6, –VOLUME- button, press to decrease the volume. 7, – Red charge LED. On: Charging. Flash: Low battery. Off: Normal battery, or complete charging. 8, –VOLUME+ button, press to increase the volume, there will be a beep when it reaches the highest volume. 9, –PLAY button, press to start playing music, and press again to stop playing. 10, Record / Play LED – Green record and play LED. Fast flash: Recording audio.
Micro SD Card / USB drive For file safety, it is best to empty and format the Micro SD card and USB drive before using. Support FAT32, exFAT (does not support NTFS), MAX 64GB. It is not recommended to connect Micro SD card and USB drive at the same time. Switch MODEs Power on, default in RECORD mode, and press MODE button can switch to PLAYBACK mode. Under PLAYBACK mode, if during playing music files, you cannot switch mode directly.
– ezcap AudioDigiBT, and successfully paired, LED is on. Play the music or video, and you will listen the sound from ezcap221 AudioDigiBT, and LED will slow flash. You also can press PLAY button of device to play or stop playing, and press PREVIOUS or NEXT button to play the previous or next file. (Maybe you need to set the audio source device) Plug Micro SD card or USB drive into the slot, and wait a few seconds, then press RECORD button to start recording, the REC/PLAY LED fast flashes.
files will be saved in the form of file name AD0001.mp3. 4,This device can be connected to two Bluetooth transmitting devices at the same time, but it can only play the audio input from one of them. If the playing Bluetooth transmitting device is paused, the device will automatically play the audio input from another one of them. PLAYBACK MODE - Play Recorded Files in Storage Press MODE button to switch RECORD MODE to PLAYBACK MODE.
Interface Audio Input Audio Output USB 2.0 Bluetooth, 3.5mm TRS audio jack Speaker, 3.5mm TRS earphone jack Button: POWER/MODE, PREVIOUS, NEXT, VOLUME -, VOLUME +, PLAY, User Interface RECORD. Status indicator LEDs Micro SD card and USB drive, supports FAT32 and exFAT, does not Storage Media support NTFS format, Max 64GB. Record Format .mp3 Record Quality 160kbps Record File About 1.
ezcap221 蓝牙音乐录制音箱 说明书
感谢您购买 ezcap221 AudioDigiBT 蓝牙音乐录制音箱。 请在使用前阅读本手册并将其保存在安全的地方 以备将来参考。 你可以使用这台机器: 将来自蓝牙或音频线路输入的音频录制为数字 mp3 文件并保存在 TF 卡或 U 盘中。 播放蓝牙音乐、音频线路输入音乐、TF 卡或 U 盘里的音乐文件。 概览 包装内容 ezcap221AudioDigiBT 蓝牙音乐录制音箱 x1, 说明书 x1, Type C 转 USB-A 充电线 x1 产品示意图及连接
1、扬声器–内置扬声器,可以直接听音乐。 内置扬声器,可以直接听音乐。 2、 –电源键:长按开机,再次长按 次长按关机。 模式键:在蓝牙和线路播放和录音模式( 键:在蓝牙和线路播放和录音模式(录制模式)和 U 盘和 TF 卡播放模式(回 回放模式)之间 切换。 3、 4、 –蓝色蓝牙 LED 指示灯,快闪: :蓝牙配对;常亮:蓝牙配对成功;慢闪:蓝牙播放。 蓝牙播放。 –上一首按键,按下可播放上一个音乐文件。 按键,按下可播放上一个音乐文件。 5、 –下一首按键,按下播放下一 按下播放下一个音乐文件。 6、 –音量减低键,按下可减低音量。 音量。
7、 – 红色充电指示灯。常亮:正在充电;闪烁:电池电量不足;关闭:电池电量正常,或完全充电。 8、 –音量增大键,按下可增大音量,达到最高音量时会有提示音。 9、 –播放/停止键,按下开始播放音乐,再按下停止播放。 10、录音/播放指示灯 –绿色录音播放 LED。快闪:录制音频;慢闪:播放 U 盘或 TF 卡中的音频文件。 11、 –录制/停止键,按下开始录音,再按下停止录音并将文件保存在 U 盘或 TF 卡中。 12、DC5V–通过 USB-C(Type-C)线提供 5V/1A 直流电源给电池充电 13、 –连接耳机听音乐(3.5mm TRS 插孔) ,扬声器将静音。 14、LINE IN–连接 CD 播放机等音源设备的音频输出口进行播放或录音。 (3.
开始工作 录制模式 - 播放和录制蓝牙或线路输入音频 长按电源键开机,设备处于默认录制模式。您可以播放和录制蓝牙或线路输入音频。 蓝色蓝牙 LED 将快速闪烁,设备正在配对蓝牙。请设置您的音源设备的蓝牙,例如您的智能手机,找到设 备名称-ezcap AudioDigiBT,配对成功,LED 灯常亮。播放音乐或视频,您会听到 ezcap221 AudioDigiBT 音箱输出的声音,LED 会慢闪。您也可以按设备的播放按钮播放或停止播放,按上一首或下一首按钮播放上 一个或下一个文件。 (可能需要设置音源设备) 将 TF 卡或 U 盘插入插槽,等待几秒钟,然后按录制键开始录制,REC/PLAY LED 快速闪烁。再次按下停 止录音,录音文件将保存在您插入的 TF 卡或 U 盘中。 使用 3.
回放模式 - 播放存储中的录制文件 按模式按钮将记录模式切换到回放模式。 ezcap221 AudioDigiBT 会自动播放 U 盘或 TF 卡中录制的文件。 注意: 1、播放过程中不能按模式键切换模式。请按播放键停止播放,然后按模式键切换模式。 2、如果同时插入 U 盘和 TF 卡,设备将播放 U 盘中的音乐文件。 3、设备无法播放不在 DIGIBT 文件夹中的音乐文件。如果存储器中没有 DIGIBT 文件夹和可播放音乐文件, 则可能会导致模式切换失败。需要拔掉存储器才能解决问题。 4、设备也可以播放其他音乐文件,但请将它们复制到 DIGIBT 文件夹中。 规格参数 接口 USB 2.0 音频输入 蓝牙,3.5 毫米 TRS 音频插孔 音频输出 扬声器,3.5mm TRS 耳机插孔 用户界面 按键:电源/模式、上一首、下一首、音量-、音量+、播放、录制。 状态指示灯 存储介质 TF 卡和 U 盘,支持 FAT32 和 exFAT,不支持 NTFS 格式,最大 64GB。 记录格式 .mp3 录音质量 160kbps 录制文件 约 1.
电源 内置 1200mAh 18650 锂电池,Type-C 转 USB 电源线(不含 5V 电源适配器) 尺寸 178(长) × 60(宽) × 70(高) mm VER:20211223
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.