TABLE OF CONTENTS Introduction 2 Safety Information 4 Product Overview 6 What’s In The Box? 6 Specifications 6 3D Views 8 PowerGrip™ & BumpGuard™ Getting Started 12 14 Speech Generation Software Setup 14 Basic Settings Overview 15 Support 16 Success Coach Program 16 Manufacturer Limited Warranty 17 Warranty FAQ 18 Directives and Standards 20 Compliance 20 Waste Electrical and Electronic Equipment Information 21 eyetechds.
PRODUCT OVERVIEW The label containing the device serial number and WHAT’S IN THE BOX? manufacturer information can be found on the back ☐ EyeOn Go Tablet ☐ Speech Generating Software of the EyeOn Go. Support may need your serial number in order to assist you, so write your ☐ AC Adapter / Power Supply serial number down in a safe, secure place.
10.2 in / 258mm (Width) Dimensions 7.3in / 186mm (Height) 0.5in / 12mm (Depth) 10.2 in / 258mm (Width) Dimensions (w/ PowerGrip™) 7.3in / 186mm (Height) 2.4in / 62mm (Depth) Physical Weight < 1.8 lbs / 0.8 kg < 3.3 lbs / 1.
1—Power Button Tap the Power Button on the top of the EyeOn Go to put the device to sleep, or wake it for use. 2—Device Volume Control Used to adjust the volume higher (+) or lower (-) on the device. 3—Infrared Transmitter/Receiver Transmits and reads infrared signals in order to allow for environmental controls. This part of the device should face the device that you wish to control. 4—User Defined Buttons This button can be customized for different functionality.