EyeCloud Cam User Manual FCC ID: 2ARI8ECC1802 SSC-1801-W
Hello! Thank you for purchasing EyeCloud Cam.
Contents What’s Inside 4 General Information 5 Ways to Place your EyeCloud Cam 6 Getting Started 7 Mount Your Camera 12 Adjust the Monitoring Range 14
1. What's Inside A. 1 x Eyecloud Cam A B C D E F B. 1 x magnetic mount C. 2 x stickers D. 1 x type-C USB cable 4 E. 3 x mounting screws F.
2. General Information This is your Eyecloud Cam.
3.
4. Getting Started EyeCloud Cam Email 1. Get the app Verification INSTALL 1. Download the app via App Store or Google Play 2. Register with your email address 1 Password Register Log In 2 3 3.
2. Switch on Eyecloud Cam Blue Light On - device is working Light Off - charge your battery 1. Get the camera out of the box 8 2.
Voltage: To Charge your Camera: 4.75V < V < 5.25V Current: > 2A 1. Get the USB Cable from the package 2. Open the rubber cover of the Data Interface on the Camera Body. 3. Connect the Camera and an Adaptor with the USB Cable.
3 3. Sync the device with the app Wi-fi 1. Open the Eyecloud Cam app Password 2. Click ‘Camera’ 4 3. Click ‘+’ [upper left corner] 4. Enter your wi-fi network name and password 5. Click ‘Next’ 5 6.
7. Scan QR code in a recommended 4 feet distance 8. Click ‘Next’ to configure your device 7 9.
5. Mount Your Camera 1. Horizontal surfaces 2. Vertical Walls Place the camera on any horizontal surface. That's about that. 1. Get the magnetic mount out the box 12 2a. Use stickers 2b.
3.
6. Adjust the Monitoring Range Rotate the camera body to adjust the horizontal range. 14 35 60 Rotate the camera head to adjust the vertical monitoring range.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.