im Vertrieb von CAMBOARD Electronics User’s Manual TP T 15HD 45 and TP T A 45 www.extron.com Extron Electronics, USA Extron Electronics, Europe Extron Electronics, Asia Extron Electronics, Japan 1230 South Lewis Street Anaheim, CA 92805 USA 714.491.1500 Fax 714.491.1517 Beeldschermweg 6C 3821 AH Amersfoort The Netherlands +31.33.453.4040 Fax +31.33.453.4050 135 Joo Seng Road, #04-01 PM Industrial Building Singapore 368363 +65.6383.4400 Fax +65.6383.
im Vertrieb von Precautions Safety Instructions • English This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product's enclosure that may present a risk of electric shock. Caution Read Instructions • Read and understand all safety and operating instructions before using the equipment.
im Vertrieb von CAMBOARD Electronics Quick Start Guide — TP T 15HD 45 / A 45 CAUTION Installation and service must be performed by authorized personnel only. These units must be installed in accordance with national and local electrical codes. Step 1 Power off all devices and disconnect them from the power source. Step 2 Connect the UTP cable from the receiver to the 8-pin connector on the TP T 15HD 45. To wire the connector, see Rear Panel Connectors in chapter 2 for the pinout table.
imStart Vertrieb von— TP T 15HD/A 45, cont’d Quick Guide CAMBOARD Electronics Table of Contents Chapter 1 • Introduction .......................................................... 1-1 Step 5 If the TP T A 45 is being installed, connect the TP T A 45 to the TP T 15HD 45. See Rear Panel Connectors in chapter 2. Features ...................................................................................... 1-2 Chapter 2 • Installation .............................................................
imContents, Vertrieb von Table of cont’d CAMBOARD Electronics TP T 15HD 45 and TP T A 45 1 Chapter One Introduction Features ii www.camboard.de TP T 15HD 45 and TP T A 45 • Table of Contents Tel. 07131 911201 Fax 07131 911203 ce-info@camboard.
im Vertrieb von Introduction, cont’d Introduction CAMBOARD Electronics The Extron TP T 15HD 45 twisted pair transmitter and the matching TP T A 45 audio input module provide a system for sending RGBHV, RGBS, RGsB, component, composite, or S-video and stereo audio signals over Extron Skew-Free™ A/V UTP cable or CAT 5/5e/6 UTP cable to a compatible TP or VTR receiver. An external 12 VDC power supply provides power to both the TP T 15HD 45 and the TP T A 45. The TP T A 45 inputs unbalanced audio through a 3.
im Vertrieb von Installation, cont’d Installation CAMBOARD Electronics AUDIO AUDIO 1b OUTPUT 1 2 3 4 5 6 7 8 12 VDC .5A MAX. 4 2 AUDIO AUDIO The wire gauge should be 14 -22 AWG and the maximum distance between the modules should not exceed 25 feet. 12 VDC .5A MAX. 3 2 Pin A + + Power Supply Output Cord Captive Screw Direct Insertion Connector The two power supply leads must be kept separated while the power supply is plugged into an electrical outlet. Remove power before wiring.
im Vertrieb von Installation, cont’d CAMBOARD Electronics Front Panel Connectors and Indicators 12345678 TP T 15HD 45 TP T A 45 1 1 COMPUTER 1&2 7&8 3 2 3&6 4&5 Twisted Wire Pairs AUDIO INPUT INPUT 3 Power input captive screw connector — Connect power input cables to the 2-pole female direct insertion captive screw connector. Figure 2-2 — Front panel views 1 Power LED indicator — The LED lights green whenever power is applied.
im Vertrieb von Installation, cont’d CAMBOARD Electronics 1 Turn all of the equipment off and, if applicable, disconnect it from the power source. As a stand-alone transmitter, the TP T 15HD 45 is compatible with: 2 Connect the TP T 15HD 45 and its receiver to either end of the UTP cable. See Cable testing and Skew delay problems in this chapter. • VTR001, VTR001 AAP, and VTR001 MAAP (RGBHV/RGBS only) For best results, use Extron UTP23SF cable available in bulk or in various preterminated lengths.
im Vertrieb von Installation, cont’d CAMBOARD Electronics • Switch to Extron’s UTP23SF cable. • Add a skew compensation cable equal to the length of pair skew to the receiver’s output. • Install an SEQ 100 15HD Skew Equalizer on the receiver’s video output and adjust the skew for the leading video image. TP T 15HD 45 and TP T A 45 A Mounting The TP T 15HD 45 and TP T A 45 are designed to fit into a wallmountable or floor box-mountable 45 mm mounting frame.
im Vertrieb von cont’d Reference Information, Reference Information CAMBOARD Electronics Specifications S/N ................................................ Crosstalk ....................................... Stereo channel separation .......... CMRR ............................................ Video — video models Number/signal type ................... 1 set of proprietary analog signals Connectors TP T 15HD 45 ....................
im Vertrieb von cont’d Reference Information, Vibration ....................................... ISTA 1A in carton (International Safe Transit Association) Compliances ................................. CE, FCC Class A, VCCI, AS/NZS, ICES MTBF ............................................. 30,000 hours Warranty ....................................... 3 years parts and labor CAMBOARD Electronics Parts Lists Included parts Description All nominal levels are at ±10%. Power supply: universal 12 VDC, 1.
im Vertrieb von cont’d Reference Information, TPwww.camboard.de T 15HD 45 and TP T A 45 • Reference Information CAMBOARD Electronics Tel. 07131 911201 Fax 07131 911203 ce-info@camboard.
