User’s Manual Infrared Remote Control www.extron.com Extron Electronics, USA Extron Electronics, Europe Extron Electronics, Asia Extron Electronics, Japan 1230 South Lewis Street Anaheim, CA 92805 USA 714.491.1500 Fax 714.491.1517 Beeldschermweg 6C 3821 AH Amersfoort The Netherlands +31.33.453.4040 Fax +31.33.453.4050 135 Joo Seng Road, #04-01 PM Industrial Building Singapore 368363 +65.6383.4400 Fax +65.6383.4664 Kyodo Building 16 Ichibancho Chiyoda-ku, Tokyo 102-0082 Japan +81.3.3511.
Precautions Safety Instructions • English This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may present a risk of electric shock. Caution Read Instructions • Read and understand all safety and operating instructions before using the equipment.
安全须知 • 中文 警告 这个符号提示用户该设备用户手册中 有重要的操作和维护说明。 电源 • 该 设 备 只 能 使 用 产 品 上 标 明 的 电 源 。 设 备 必须使用有地线的供电系统供电。 第三条线 (地线)是安全设施,不能不用或跳过。 这个符号警告用户该设备机壳内有暴 拔掉电源 • 为安全地从设备拔掉电源,请拔掉所有设备后 或桌面电源的电源线,或任何接到市电系统的电源线。 露的危险电压,有触电危险。 电源线保护 • 妥善布线, 避免被踩踏,或重物挤压。 注意 阅读说明书 • 用 户 使 用 该 设 备 前 必 须 阅 读 并 理 解所有安全和使用说明。 保存说明书 • 用户应保存安全说明书以备将来使 用。 遵守警告 • 用户应遵守产品和用户指南上的所有安 全和操作说明。 避免追加 • 不要使用该产品厂商没有推荐的工具或 追加设备,以避免危险。 维护 • 所有维修必须由认证的维修人员进行。 设备内部没 有用户可以更换的零件。为避免出现触电危险不要自己 试图打开设备盖子维修该设备。 通风孔 • 有些设备机壳上有通风槽或孔,它们是用来防止 机内敏感元件过热。 不要用任何东西挡住通风孔。
Table of Contents Chapter One • Installation and Operation . .................. 1-1 About the IR 102 Kit .................................................................. 1-2 Mounting the IR 102 Rx Remote Receiver . ........................ 1-2 Rack mounting ........................................................................ 1-2 Furniture mounting ................................................................ 1-4 Projector mounting .................................................................
Table of Contents, cont’d IR 102 Remote Control Kit 1 Chapter One Installation and Operation About the IR 102 Kit Mounting the IR 102 Rx Remote Receiver Connecting the Receiver to a Switcher Features and Connections Installing Batteries in the Remote Operation ii IR 102 Remote Control Kit • Table of Contents
Installation and Operation About the IR 102 Kit The Extron IR 102 Kit is an infrared (IR) remote control kit that can control a variety of Extron switchers and other devices via RS-232 or contact closure. This kit contains the following items: • (1) IR 102 handheld remote control • (1) IR 102 Rx Remote Receiver • (1) IR Sensor Mounting the IR 102 Rx Remote Receiver The IR 102 Rx Remote Receiver can be mounted on a rack shelf, under a desk or tabletop, or on a projector bracket.
Installation and Operation, cont’d Furniture mounting IN Tx CONTROL OUT CONTACT RS-232 RS-232/ CONTACT OUT RS-232 UNIVERSAL IR REMOTE RECEIVER 1 2 3 4 5 6 IR IN IN Projector Slide the receiver slightly forward or back, then tighten all four screws to secure the Remote Receiver Projector Mounting in place. OUT +5 IR 102 Rx 7. RS-232 +12V POWER 12V .
Installation and Operation, cont’d N N On the side mounting plates, devices are typically mounted on the outside of the bracket. On the front mounting plate, devices are typically mounted on the inside of the bracket. The front mounting plate is 1/4" taller than the side plates. This size helps ensure the accessibility of buttons or connectors. 3. Affix the black rubber pad to the mounting plate. 4.
Installation and Operation, cont’d Features and Connections c IR In connector — Plug the cable from the IR sensor or from an Extron IR Link infrared repeaterwiring_030606.eps into this 3.5 mm, 5-pole captive IR In connector screw connector. 1 IR 102 Rx UNIVERSAL IR REMOTE RECEIVER DEMOD 3 IN 6 Tx Rx RS-232/ CONTACT OUT 5 4 IR In Power LED — When lit, this LED indicates power is applied. The LED blinks during communication activity.
Installation and Operation, cont’d closure/RS-232 control port. This permits the IR 102 Rx Remote Receiver to control the switcher. The pin assignments are listed in the following table. See the note for N Connect RS-232 or contact closure, but not both. Remove the pins that are not needed.
Installation and Operation, cont’d IR 102 Remote Control Kit A Appendix A Specifications, Part Numbers, and Accessories Specifications Included Parts Accessories 1-12 IR 102 Remote Control Kit • Installation and Operation
Specifications, Part Numbers, and Accessories Specifications These items are included in each order for an IR 102 Remote Kit (part #70-224-01): General Carrier frequency........................... 38 kHz Max. IR range (between IR handheld remote control and IR sensor) 30 feet (9.1 meters) Max. IR sensor cable length.......... 21 feet (6.4 meters) External power supply (included) 100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 12 VDC, 1 A, regulated Power input requirements............
Specifications, Part Numbers, and Accessories Accessories A-4 Part number VersaTools multi-product projector mounting kit (PMK 300) 70‑374‑01 VersaTools multi-product projector mounting kit (PMK 350) 70-563-02, -03 IR 102 Remote Control Kit • Specifications, Part #s, Accessories