5-in-1 WiFi Professional Weather Station Art.No.
EN INSTRUCTION MANUAL ABOUT THIS INSTRUCTION MANUAL These operating instructions are to be considered a component of the device. Please read the safety instructions and the operating instructions carefully before use. Keep these instructions for renewed use at a later date. When the device is sold or given to someone else, the instruction manual must be provided to the new owner/user of the product. The device is intended only for indoor use.
TABLE OF CONTENTS INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 OVERVIEW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONSOLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCD DISPLAY . . . . . . . . .
INTRODUCTION Thank you for selecting the 5-in-1 WiFi Professional Weather Station. This system gathers and automatically uploads accurate and detailed weather data to Weather Underground and Weathercloud website - the famous weather service which allows weather observers to upload their local weather data with automated personal weather stations (PWS) - at which you can access and upload your weather data freely.
1. 2. 3. 4. 5. 6. 7. 8. [ ALARM/SNOOZE ] key LCD display [ HISTORY ] key [ RAIN ] key [ BARO ] key [ MAX / MIN ] key [ INDEX ] key [ WIND ] key 9. Table stand 10. Wall mounting holder 11. [ ALERT ] key 12. [ ALARM ] key 13. [ CLOCK SET ] key 14. [ HI / LO / AUTO ] key 15. [ CHANNEL ] key 16. [ SENSOR / WI-FI ] key 17. Battery door 18. USB Power socket 19. [ ] key 20. [ ] key 21. [ RESET ] key 22. [ BARO UNIT ] key 23. [ REFRESH ] key 24.
RAIN GAUGE 1. Rain collector 2. Tipping bucket 3. Rain sensor 4. Drain holes TEMPERATURE AND HUMIDITY SENSOR 1. Radiation shield Sensor casing 2. Temperature and humidity sensor (inside the radiation shield) 1 2 WIND SENSOR 1. Wind cups (anemometer) 2. Wind vane INSTALLATION AND SETUP INSTALL WIRELESS 5-IN-1 WEATHER SENSOR Your wireless 5-IN-1 sensor measures wind-speed, wind-direction, rainfall, temperature and humidity for you. It’s assembled and calibrated for your easy installation.
ASSEMBLY THE STAND AND POLE Step 1 Insert the top side of the pole to the square hole of the weather sensor. NOTE: Ensure the pole and sensor's indicator align. Step 2 Place the nut in the hexagon hole on the sensor, then insert the screw in other side and tighten it by the screw driver. Step 3 Insert the other side of the pole to the square hole of the plastic stand. NOTE: Ensure the pole and stand's indicator align.
Install the wireless 5-IN-1 sensor in an open location with no obstructions above and around the sensor for accurate rain and wind measurement. Install the sensor with the smaller end facing the North to properly orient the wind direction vane. Secure the mounting stand and bracket (included) to a post or pole, and allow minimum 1.5m off the ground. Add rubber pads before mount on the pole Point to NORTH 1.
SET LCD DISPLAY VIEWING ANGLE Press [ ] or [ ] key in normal mode to adjust LCD viewing angle to fit table stand or wall mount situation. PAIRING WIRELESS 5-IN-1 WEATHER SENSOR & CONSOLE After insert of batteries, the console will automatically search and connect the wireless 5-IN-1 sensor (the sensor antenna icon blinking). Once the connection is successful, antenna icon and readings for outdoor temperature & humidity, wind speed, wind direction and rainfall will appear on the LCD.
3. In "My Weather Station" page bottom, press the "Add New Device" button to add your device. 4. Follow their instruction to enter your station information, in the Step "Tell Us More About Your Device", enter a Name for your weather station, then choose “Other” in “Device Hardware” section. fill in other the other information and select "I Accept" to accept Weather underground's privacy terms, then click “Next” to create your station ID and key. 5.
NOTE: Use the valid email address to register your account. 2. Sign in weathercloud and then you will go the "Devices" page, click "+ New" to create new device. 3. Enter all the information in Create new device page, for the Model* selection box select the "W100 Series" under "CCL" section. for the Link type* selection box select the "Pro Weather Link", Once you have completed, click Create. 4. Jot down your ID and key for the further setup step.
SETUP WI-FI CONNECTION 1. When you first power up the console, or press and hold the [ SENSOR / WI-FI ]key for 6 seconds in normal mode, the console LCD will show "AP" and " " icon to signify that it has entered AP (access point) mode, and is ready for WI-FI settings. 2. Use the smart phone, tablet, or computer to connect to the console through WI-FI. WI-FI to select the 3.
SETUP THE WEATHER SERVER CONNECTION Enter the following information into the below web interface "SETUP" page. If you choose not to use Wunderground.com or Weathercloud.net, leave the check boxes unchecked.
The time will automatically synchronize Internet time server at 12:00AM and 12:00PM per day. Also you can press the [REFRESH ] key to get the internet time manually within 1 minute. ADVANCE SETTING IN WEB INTERFACE Press "ADVANCED" key at the top of web interface to enter the advance setting page, this page allow you to set and view the calibration data of the console, also you can update the firmware in here (Only available in PC platform).
Another way to view your station is use the web browser URL bar, type below in the URL bar: https://www.wunderground.com/dashboard/pws/XXXX Then replace the XXXX by your Weather underground station ID to go to your station live view directly. You can also use the Apple ipad's "WunderStation" app to login your own weather station to view the live data. WunderStation VIEWING YOUR WEATHER DATA IN WEATHERCLOUD 1.
FIRMWARE UPDATE STEP 1. Download the latest version firmware (function or WI-FI) to your PC. 2. Set the Console into AP (access point) mode then connect the PC to the console (ref to "SETUP WI-FI CONNECTION" section in previous page). Browse in Function firmware section and 3. To update the Function firmware, click the browse to the location of the file you download in step 1. To update the WI-FI firmware, click Browse the in WI-FI firmware section. Upload Function firmware version: 1.00 to start 4.
MOON PHASE The moon phase is determined by the time, date and time zone. The following table explains the moon phase icons of the Northern and Southern hemispheres. Please refer to ORIENTING THE 5-IN-1 SENSOR TOWARDS SOUTH section about how to setup for the Southern hemispheres.
ACTIVATING ALARM AND TEMPERATURE PRE-ALARM FUNCTION 1. In normal mode, press [ ALARM ] key to show the alarm time for 5 seconds. 2. When the alarm time displays, press [ ALARM ] key again to activate the alarm function. Or press [ ALARM ] key twice to activate the alarm with ice pre-alarm function. Alarm off Alarm on Alarm with ice-alert NOTE: Once the ice pre-alert activates, the pre-set alarm will sound and ice-alert icon will flash 30 minutes earlier if the outdoor temperature is below -3°C.
WIRELESS SENSOR SIGNAL RECEIVING 1. The console display signal strength for the wireless 5-IN-1 sensor, as per table below: No signal Weak signal Good signal 2. If the signal has discontinued and does not recover within 15 minutes, the signal icon will disappear. The temperature and humidity will display “Er” for the corresponding channel. 3. If the signal does not recover within 48 hours, the “Er” display will become permanent.
HEAT INDEX The heat index, which is determined by the wireless 5-IN-1 sensor's temperature & humidity data, when the temperature is between 27°C (80°F) and 50°C (120°F).
TO VIEW THE ABSOLUTE / RELATIVE BAROMETRIC READING In normal mode, press [ BARO ] key to switch between ABSOLUTE / RELATIVE barometric reading. RAINFALL The RAINFALL section shows the rainfall and rain rate information. TO SET THE RAINFALL UNIT 1. Press and hold [ RAIN ] key for 2 seconds to enter unit setting mode. 2. Press [ ] or [ ] key to toggle the rainfall unit between mm and in. 3. Press [ RAIN ] key to confirm and exit the setting.
PAST 24 HOURS HISTORY DATA The console automatically stores the weather data of the past 24 hours. 1. Press [ HISTORY ] key to check the beginning of the current hour's weather data, e.g. the current time is 7:25 am, March 8, the display will show the data of 7:00am, March 8. 2. Press [ HISTORY ] key repeatedly to view older readings of the past 24 hours, e.g.
NOTE: --Once the alert is triggered, the alarm will sound for 2 minutes and the related alert icon and readings will flash. --If the alert alarm is automatically off after 2 minutes, the alert icon and readings will still keep flash until the weather reading is out of the alert range. --The weather alert will sound again when the weather readings falls into the alert range again.
--Placement of this product on certain types of wood may result in damage to its finishing for which manufacturer will not be responsible. Consult the furniture manufacturer’s care instructions for information. --Only use fresh batteries. Do not mix new and old batteries. --Only use attachments / accessories specified by the manufacturer. --Images shown in this manual may differ from the actual display. --When disposing of this product, ensure it is collected separately for special treatment.
Time synchronize method Through Internet time server to synchronize the UTC Weekday languages EN / DE / FR / ES / IT / NL / RU Time Zone +13 ~ -12 hour DST ON / OFF Barometer Display & Function Specification Note: The following details are listed as they are displayed or operate on the console. Barometer unit hPa, inHg and mmHg Measuring range 540 ~ 1100hPa (relative setting range 930 ~ 1050hPa) (700 ~ 1100hPa ± 5hPa) / (540 ~ 696hPa ± 8hPa) (20.67 ~ 32.48inHg ± 0.15inHg) / (15.95 ~ 20.55inHg ± Accuracy 0.
Wind Speed & Direction Display and Function Specification Note: The following detail are listed as they are displayed or operate on the console. Wind speed unit mph, m/s, km/h and knots Wind speed display range 0 ~ 112mph, 50m/s, 180km/h, 97knots Resolution mph, m/s, km/h and knots (1 decimal place) Speed accuracy < 5m/s: +/- 0.
EC DECLARATION OF CONFORMITY Hereby, Bresser GmbH declares that the equipment type with part number: WSX1001 is in compliance with Directive: 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.bresser.de/download/WSX1001/CE/WSX1001_CE.pdf RCM DECLARATION OF CONFORMITY The product complies with electrical safety, EMC and radio spectrum regulatory requirements for products supplied to the Australia or New Zealand market.
MANUAL DOWNLOAD: Manual_WSX1001CM3LC1_Weather-Center-5in1_en_EXPSC_v102019a Errors and technical changes reserved. www.bresser.de/download/WSX1001 SERVICE AND WARRANTY: www.bresser.de/warranty_terms Bresser GmbH Gutenbergstr. 2 · DE-46414 Rhede Germany www.bresser.de · service@bresser.