5-in-1 Wi-Fi Professional Wearther Station Art. NO.
ABOUT THIS USER’S MANUAL This symbol represents a warning. To ensure safe use, always adhere to the instructions described in this documentation. This symbol is followed by a user’s tip. PRECAUTIONS --Keep and reading the “User manual” is highly recommended. The manufacturer and supplier cannot accept any responsibility for any incorrect readings, export data lost and any consequences that occur should an inaccurate reading take place.
TABLE OF CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONSOLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCD DISPLAY . . . . . . .
INTRODUCTION Thank you for selecting Wi-fi weather station with 5-in-1 professional sensor. This system gathers and automatically uploads accurate and detailed weather data to Weather Underground and Weathercloud website - the famous weather service which allows weather observers to upload their local weather data with automated personal weather stations (PWS) - at which you can access and upload your weather data freely.
1. 2. 3. 4. 5. 6. 7. 8. [ ALARM/SNOOZE ] key LCD display [ HISTORY ] key [ RAIN ] key [ BARO ] key [ MAX / MIN ] key [ INDEX ] key [ WIND ] key 9. Table stand 10. Wall mounting holder 11. [ ALERT ] key 12. [ ALARM ] key 13. [ CLOCK SET ] key 14. [ HI / LO / AUTO ] key 15. [ CHANNEL ] key 16. [ SENSOR / WI-FI ] key 17. Battery door 18. USB Power socket 19. [ ] key 20. [ ] key 21. [ RESET ] key 22. [ BARO UNIT ] key 23. [ REFRESH ] key 24.
RAIN GAUGE 1. Rain collector 2. Tipping bucket 3. Drain holes 4. Rain sensor TEMPERATURE AND HUMIDITY SENSOR 1. Radiation shield Sensor casing 2. Temperature and humidity sensor (inside the radiation shield) 1 2 WIND SENSOR 1. Wind cups (anemometer) 2. Wind vane INSTALLATION AND SETUP INSTALL WIRELESS 5-IN-1 WEATHER SENSOR Your wireless 5-IN-1 sensor measures wind-speed, wind-direction, rainfall, temperature and humidity for you. It’s assembled and calibrated for your easy installation.
ASSEMBLY THE STAND AND POLE Step 1 Insert the top side of the pole to the square hole of the weather sensor. NOTE: Ensure the pole and sensor's indicator align. Step 2 Place the nut in the hexagon hole on the sensor, then insert the screw in other side and tighten it by the screw driver. Step 3 Insert the other side of the pole to the square hole of the plastic stand. NOTE: Ensure the pole and stand's indicator align.
Install the wireless 5-IN-1 sensor in an open location with no obstructions above and around the sensor for accurate rain and wind measurement. Install the sensor with the smaller end facing the North to properly orient the wind direction vane. Secure the mounting stand and bracket (included) to a post or pole, and allow minimum 1.5m off the ground. Add rubber pads before mount on the pole Point to NORTH 1.
SET LCD DISPLAY VIEWING ANGLE Press [ ] or [ ] key in normal mode to adjust LCD viewing angle to fit table stand or wall mount situation. PAIRING WIRELESS 5-IN-1 WEATHER SENSOR & CONSOLE After insert of batteries, the console will automatically search and connect the wireless 5-IN-1 sensor (the sensor antenna icon blinking). Once the connection is successful, antenna icon and readings for outdoor temperature & humidity, wind speed, wind direction and rainfall will appear on the LCD.
3. In "My Weather Station" page bottom, press the "Add New Device" button to add your device. 4. In step “Select a Device Type”, choose “Other” in the list, then press “Next”. 5. In step “Set Device Name & Location”, select your location in on the map. 6. Follow their instruction to enter your station information, in the Step "Tell Us More About Your Device", enter a Name for your weather station, then choose “Other” in “Device Hardware” section.
7. Jot down Your "Station ID" and "Station key" for the further setup step. CREATE WEATHERCLOUD ACCOUNT 1. In https://weathercloud.net enter your information in "Join us today" section, then follow the instructions to create your account. NOTE: Use the valid email address to register your account. 2. Sign in weathercloud and then you will go the "Devices" page, click "+ New" to create new device.
3. Enter all the information in Create new device page, for the Model* selection box select the "W100 Series" under "CCL" section. for the Link type* selection box select the "Pro Weather Link", Once you have completed, click Create. 4. Jot down your ID and key for the further setup step. SETUP WI-FI CONNECTION 1.
3. In PC / Mac choose WiFi network settings or In Android / iOS choose setting WI-FI to select the console’s SSID: PWS-XXXXXX in the list and it will need several second to connect. PWS-XXXXXX PWS-XXXXXX PC WI-FI network interface Android WI-FI network interface 4. Once connected, enter the following IP address into your internet browser’s address bar, to access the console’s web interface: http://192.168.1.1 NOTE : -- Some browsers will treat 192.168.1.
SETUP THE WEATHER SERVER CONNECTION Enter the following information into the below web interface "SETUP" page. If you choose not to use Wunderground.com or Weathercloud.net, leave the check boxes unchecked.
other setting for the console. The time will automatically synchronize Internet time server at 12:00AM and 12:00PM per day. Also you can press the [REFRESH ] key to get the internet time manually within 1 minute. ADVANCE SETTING IN WEB INTERFACE Press "ADVANCED" key at the top of web interface to enter the advance setting page, this page allow you to set and view the calibration data of the console, also you can update the firmware in here (Only available in PC / Mac platform).
must be calibrated to sea-level to account for altitude effects. VIEW YOUR WEATHER DATA IN WUNDERGROUND To view your weather station live data in a web browser (PC / Mac or mobile version), please visit http://www.wunderground.com, and then enter your “Station ID” in the searching box. Your weather data will show up on the next page. You can also login your account to view and download the recorded data of your weather station.
FIRMWARE UPDATE The console supports OTA firmware update capability. Its firmware may be updated over the air anytime (whenever necessary) through any web-browser on a PC / Mac with WI-FI connectivity. Update function, however, is not available through mobile/smart devices. Two types of firmware updates are available, namely Function Firmware and System WI-FI Firmware, and are located at the bottom of ADVANCED page. Current Function firmware version Current WI-FI firmware version FIRMWARE UPDATE STEP 1.
--When the update process start, do not operate the PC / Mac and console. --During firmware update the console will stop upload data. It will reconnect to your WI-FI router and upload the data again once the update success. If the console cannot connect to your router, please end the SETUP page to setup again. --After the firmware updates, user might need to input the Weather Underground ID and password again.
for the user's convenience (e.g. users in the Southern hemisphere), it is possible to use the sensor with the wind vane pointing to South. 1. Install the 5-IN-1 wireless sensor with its wind meter end pointing to South. (Please refer to INSTALLATION OF THE WIRELESS SENSOR for mounting details) 2.
TEMPERATURE / HUMIDITY FUNCTION & TREND Use the [ °C / °F ] slide switch to select the temperature display unit. The temperature / humidity trend indicator shows the trends of changes in the forthcoming few minutes. Arrow indicator Temperature / Humidity trend Rising Steady Falling NOTE: --When indoor temperature is below -40°C, the LCD will display “Lo”. If temperature is above 70°C, LCD will display “HI”. --When outdoor temperature is below -40°C, the LCD will display “Lo”.
Real time wind direction indicator Past wind directions indicator of last 5 minutes Average / gust wind speed TO SET THE WIND SPEED UNIT AND DIRECTION DISPLAY FORMAT 1. In normal mode, press and hold [ WIND ] key for 2 seconds to enter into wind speed unit mode and the unit will flash. Press [ ] or [ ] key to change the wind speed unit in this sequence: m/s km/h knots mph 2. Press [ WIND ] key again to return to normal mode.
it can predict the weather conditions in the forthcoming 12~24 hours within a 30~50km (19~31 miles) radius. Sunny Partly cloudy Cloudy Rainy Rainy / Stormy Snowy NOTE: --The accuracy of a general pressure-based weather forecast is about 70% to 75%. --The weather forecast is reflecting the weather situation for next 12~24 hours, it may not necessarily reflect the current situation. --The SNOWY weather forecast is not based on the atmospheric pressure, but based on the temperature of outdoor.
5. Total - the total rainfall since the last reset 6. Rate - Current rainfall rate in past an hour (Update every 24 seconds) TO RESET THE TOTAL RAINFALL RECORD In normal mode, press and hold [ HISTORY ] key for 2 seconds to reset all the rainfall record.
Indoor Temperature High Alert (current channel) Indoor Temperature Low Alert (current channel) Indoor Humidity High Alert (current channel) Indoor Humidity Low Alert (current channel) Outdoor Temperature High Alert Outdoor Temperature Low Alert Outdoor Humidity High Alert Outdoor Humidity Low Alert Average Wind Speed Pressure Drop Hourly Rainfall 40°C -40°C ~ 80°C Indoor / CH temperature & humidity 1% ~ 99% -40°C ~ 80°C 1% ~ 99% 0°C 80% 40% Outdoor temperature & humidity 0.
MAINTENANCE BATTERY REPLACEMENT If the low battery indicator “ ” displayed in OUT or CH section, it indicates that the current channel wireless or outdoor 5-in-1 sensor battery power is low. You should replace all the batteries in the current channel sensor at once. CLEANING THE RAIN COLLECTOR 1. Unscrew the rain collector by turning it 30°anti-clockwise. N 2. Gently remove the rain collector. 3. Clean and remove any debris or insects. 4. Install the collector when it is clean and fully dried.
915Mhz (US version) / 868Mhz (EU or UK version) / 917Mhz (AU version) RF transmission range 150m Time Related Function Specification Time display HH: MM Hour format 12hr AM / PM or 24 hr Date display DD / MM or MM / DD Time synchronize method Through Internet time server to synchronize the UTC Weekday languages EN / DE / FR / ES / IT / NL / RU Time Zone +13 ~ -12 hour DST ON / OFF Barometer Display & Function Specification Note: The following details are listed as they are displayed or operate on the consol
Resolution 1% Display modes Current Memory modes Historical data of past 24 hours, Max / Min Alarm Hi / Lo Humidity Alert Wind Speed & Direction Display and Function Specification Note: The following detail are listed as they are displayed or operate on the console. Wind speed unit mph, m/s, km/h and knots Wind speed display range 0 ~ 112mph, 50m/s, 180km/h, 97knots Resolution mph, m/s, km/h and knots (1 decimal place) Speed accuracy < 5m/s: ± 0.
FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
