Bed Shaker 520 Models CFBS520/CFBS520C Owner’s Manual Combined 520 Hz Horn and Bed Shaker • Physically Shakes the Bed While Alarming • Low Frequency, Bed Level Alarm Sound • Easy to Reach Silence Feature • Proprietary Wireless Connectivity SIGNALING MADE IN THE U.S.A.
Table of Contents About Your New Bed Sharker 520 Alarm Accessory General Information About Your New Bed Shaker 520 ................................ page 3 Thank you for purchasing the Crossfire CFBS520 Bed Shaker 520. The Bed Shaker can play an important role in protecting your loved ones from the dangers of fire. Please carefully read and follow the information in this booklet to ensure that your Bed Shaker is setup and installed properly. Contents of your Kit ..........................................
Contents of Your Kit Recommended Locations for your Bed Shaker 520 Please make sure the following is included in your Bed Shaker 520 kit: Speaker Unit Shaker Unit Bedrooms. A major threat from fire occurs at night when people are sleeping. Smoke alarms are required protection in all sleeping rooms. The Bed Shaker 520 offers additional help waking the elderly, children, people with hearing impairments, and heavy sleepers. This unit is to be installed in a room occupied for sleeping.
Complete Home Fire Protection Bed Shaker Features and Functions Exigent Sensors recommends complete home fire protection. This can be achieved by installing a combination of Crossfire alarms and products in their appropriate locations in every room of the house. Power Indicator Light (Green) On the CFBS520, the POWER icon will briefly flash every 56 seconds when the batteries are installed.
Crossfire Features and Functions Creating Your Radio Network Testing the Bed Shaker 520 The Crossfire product line communicates on its own private radio network. This network is created simply by powering up new units one at a time. Every Crossfire alarm or product should be tested weekly to ensure proper operation. To test the Bed Shaker 520 or any Crossfire alarm, press and release the button on the front face of the unit.
Adding a Bed Shaker 520 to Your Radio Network Removing a Bed Shaker 520 from a Radio Network To add a Bed Shaker(s) to an existing home network, perform the following steps. In the event that a Crossfire alarm or product must be removed from your network, the alarm’s network data must be erased from its memory. Select any alarm/unit on the existing network. Press and hold the button on the front cover of the alarm.
Setting Up Your Bed Shaker 520 Alarm Specifications If you have not already done so, install the batteries and join the Bed Shaker 520 into your Crossfire radio network (see Pages 10-11). Operating Voltage CFCFBS520/CFBS520C Standby Current CFBS520/CFBS520C Alarm Current CFBS520/CFBS520C Battery Type Sound Operating Ambient Temperature Operating Humidity Speaker Unit Dimensions Route cord behind stand and headboard Place the Speaker unit on your night stand or table.
Important Fire/Emergency Safety Information Be prepared for fire emergencies: Plan Your Escape • Draw a floor plan of your home. • Show two ways out of each room. • Discuss escape routes with everyone in your home. • Agree on an outside meeting place where you’ll gather after escaping. Be Prepared • Familiarize every member of the household with the sound of the smoke, CO and heat alarms. • Have everyone in the home memorize the fire department’s emergency phone number.
Limited Warranty For a period of 24 months from the date of purchase, Exigent Sensors LLC warrants to you, the original purchaser, that your Crossfire Bed Shaker 520 will be free from defects in workmanship, materials, and construction under normal use and service.
18 19
Exigent Sensors LLC 11331 Markon Drive Garden Grove, CA 92841 USA www.crossfirealarms.com 20 REV 10.23.
