KitSound KS XDOCK Qi Qi CHARGING BLUETOOTH SPEAKER DOCK 1 2 3 4 5 6 7 8 (Qi logo) USER MANUAL Please read this manual carefully before use. Box contents: • KS XDock Qi • • • AC/DC adaptor (UK & US plug attachments) 3.5 mm aux cable User manual Functions Top view 1. 2. 3. 4. 5. 6. 7. 8. Play/pause/pair/select Previous Track/Volume -/AutoScan Next Track/Volume +/AutoScan + Alarm 1 Alarm 2 Standby/Mode Light brightness Sleep/Snooze 12 Rear view 9. 10. 11. 12.
Screen icons a. b. c. d. e. f. g. Alarm 1 Alarm 2 Bluetooth mode Qi charging device FM radio mode Aux mode Time display Note: To prevent the overheating of device or product, the KS XDOCKQI has built-in Foreign Object Detection (FOD). This is a safety mechanism that automatically interrupts power delivery if any foreign object that can absorb energy (such as a coin, paper clip, or other metallic/magnetic object) is detected.
Paired in Bluetooth® but not playing audio Bluetooth icon (c) - Solid white Aux-in mode Aux icon (f) - Solid white Radio mode Radio icon (e) - Solid white Qi device charging (d) - Solid white Qi charging Qi device finished charging (d) - Off Alarm 1 On - Solid white, Off – No light Alarm 2 On - Solid white, Off – No light Note: To factory reset the XDock Qi: 1. Unplug the XDock Qi from power 2. Press and hold the Standby/Mode button (6) while plugging the power adaptor in DC IN input (11) 3.
How to avoid slow Qi charging You can charge your device on the Qi charging area with the case on, but devices with cases on will charge slower than those with no case. The thickness of the case will also affect how much slower the device charges compared to those without a case. How to prevent charge not functioning Note: To prevent the overheating of device or product, the KS XDock Qi has built-in Foreign Object Detection (FOD).
1. With the XDock Qi in standby mode, long press Play/pause (1) and it will automatically enter 24H mode 2. Press Plus Icon (3) or Minus Icon (2) to increase or decrease the hours, then press Play/pause (1) to confirm 3. Press Plus Icon (3) or Minus Icon (2) to increase or decrease the minutes, then press Play/pause (1) to confirm 4. The time will now be set Note: To make sure the time set is not lost during a power cut, please insert 2 AAA batteries (not included) into the battery compartment (13).
With the XDock Qi in any mode, press Alarm 1 (4) or Alarm 2 (5) once. The Alarm 1 (4) or Alarm 2 (5) icons respectively will disappear from the screen. Adjusting the screen brightness With the XDock Qi in any mode, press Light brightness (7) to cycle through (Off, High brightness, Medium brightness and Low brightness). Sleep timer If you want the XDock Qi to switch off after a set time, follow the below instructions. This is best used when falling asleep to the radio.
Note: The Play/pause (1) and skip track (2 and 3) functions on the XDock Qi will not operate in Aux mode. Note: The XDock Qi’s internal amplifier will go to standby after 15 minutes of no music activity. FM radio To use the FM radio 1. If the XDock Qi is in standby mode, long press Standby/Mode (6) 2. Press Standby/Mode (6) to cycle through the input selection to FM radio mode, this will be displayed on the screen (15) 3.
Please DO: • Clean the XDock Qi with a soft dry cloth and no detergents Specifications: Bluetooth technology Bluetooth connectivity range Up to 10 m Transmission Frequency band 2402 – 2408 MHz Transmission Power Class II <2.5 mW(4 dBm) Qi charging Wattage 10 Qi charging operating 105 KHz – 205 KHz frequency band FM frequency response 87.
Hereby, Kondor Ltd declares that the radio equipment type, XDOCK Qi CHARGING BLUETOOTH SPEAKER DOCK, is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://kondor.co.uk/product-documents US Responsible Party Information Name: Mobileistic, LLC Address: 205 Marcus Boulevard, Hauppauge, New York 11788 Telephone: 631-531-9500 Email: support@mobileistic.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
Please refer to the enclosed manual for further information. (this is from the packaging copy???) JB. 6553_a/Made in China.
