User's Guide

ManualsBrandsexcelsecu ManualsComputers & AccessoriesThermal receipt printer

www.excelsecu.com

Ver.

1.0

ESPT-100

User Guide

1. Introduction

This manual explains the ESPT-100 installation procedure and the procedure for

connecting it to a tablet,PC,or other device.For the Windows driver installation

procedure,or if the connection does not succeed,refer to the ESPT-100 online

manual.You can find the manual on the following website:

https://www.excelsecu.com.cn/.

2. Packing list

Please check the supplied accessories,if any of the package contents are missing or

damaged,contact the dealer where the product was purchased.Accessories may vary

depending on the configuration selected by the customer and the region where the

printer was purchased.

ESPT-100 1

AC to DC power supply 1

ESPT-100 User Guide 1

USB (Type C) data cable 1

Paper Roll 2

Summary of content (5 pages)

PAGE 1
ESPT-100 User Guide 1. Introduction This manual explains the ESPT-100 installation procedure and the procedure for connecting it to a tablet,PC,or other device.For the Windows driver installation procedure,or if the connection does not succeed,refer to the ESPT-100 online manual.You can find the manual on the following website: https://www.excelsecu.com.cn/. 2.
PAGE 2
3. Specification information Model ESPT-100 Size 151*119*118mm Painting mode thermal Interface Power/USB Type-C Key Power switch、Menu、Vol+、Vol-、Feed Led Power、Paper、status Resolution 203dpi Paper Width 58mm Speed 90mm/s Paper roll diameter 80mm（max） Flash 4M Print head temperature detection Support Paper shortage detection Support Power input DC 9V/2A Allowable working condition Humidity:20%~90% Temperature:-25~+60℃ storage condition Ver.1.
PAGE 3
4. Set Up the Printer 4.1 Inserting a Paper Roll 1. Please confirm the product you choose is automatic paper cutting or manual paper tearing.  Automatic paper cutting Press the opening button on the side to open the upper cover.  Manual paper tearing Push the upper cover up to open it. 2. Insert a paper roll in the paper storage box. 3. Pull the end of the paper out straight,and push down both sides of the printer cover to close. 4.2 Turn ON the Main Unit Power 1.
PAGE 4
.4 Connect ESPT-100 with WIFI 1. Download the Windows drivers on the following website: https://www.excelsecu.com.cn, then install the drivers(the same drivers for USB). 2. Make sure the power switch of ESPT-100 is off,connect the computer and ESPT-100 with the USB type-C cable. 3. Make sure there is paper roll in ESPT-100 then turn on the power switch. 4. Download the APP on the following website: https://www.excelsecu.com.cn, then install it. 5. Press the Fn.
PAGE 5
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.