eSecuCard-S User Manual (V1.1) Excelsecu Data Technology Co., Ltd. www.excelsecu.
CONFIDENTIAL information of Excelsecu Data Technology Co., Ltd. NO WARRANTIES OF ANY NATURE ARE EXTENDED BY THIS DOCUMENT. Any product and related material disclosed herein are only furnished pursuant and subject to the terms and conditions of a duly executed Program Product Licence or Agreement to purchase or lease equipment. The only warranties made by Excelsecu Technology, if any, with respect to the products described in this document are set forth in such Licence or Agreement.
Table of Contents 1. 2. 3. 4. 5. 6. 7. Getting Started with eSecuCard-S ............................................................................................. 4 Safety Caution ........................................................................................................................... 4 Product Picture.......................................................................................................................... 5 How to Use eSecuCard-S ......................................
Thank You for Using eSecuCard-S Product IMPORTANT INSTRUCTIONS Please read this manual before operating your eSecuCard-S and keep it for future reference. 1. Getting Started with eSecuCard-S ⚫ Please check eSecuCard-S’s battery level and make sure it’s not in low-power state before using it. ⚫ Please make sure eSecuCard-S to be charged when it’s in low-power condition, otherwise the RTC will be lost permanently. 2. Safety Caution ⚫ Do not put objects on the top of eSecuCard-S.
3. Product Picture ① EPD screen, 256*256 pixel. ② EMV chip, also battery recharging terminal. ③ Touch keypad: 0~9, a~z, OK and Cancel. ④ Power mechanical button. 4. How to Use eSecuCard-S 4.1. Turn ON/OFF eSecuCard-S 1. Long press the mechanical Power Button to power on/off. You need to set the PIN first after power on. It supports 6 to 16 digits. After set successfully, it shows the boot up logo and enters the BLE mode. If you have set the PIN before, you need to verify the PIN first after power on.
⚫ Change PIN ⚫ About Of which: ➢ Address To display QR code and text. Automatically return to the function menu after 10 seconds. ➢ Change PIN To change the password of the eSecuCard-S. ➢ About To show the version information. 4.2. Mobile Application (Note: eSecuCard-S needs to be turned ON!) 4.2.1. Download Demo Application Download mobile application and open it: Android: Bigplatform.apk, iOS: Bigplatform.ipa.
4.2.2. Bluetooth Mode It enters the Bluetooth mode automatically after power-on. 1. Connect and Disconnect. 1) Click Scan and Connect. 2) Select SN: 830X000000XX (Note: SN is on the back of each card. SN can be customized.) 3) eSecuCard-S will display “BLE Connected”, and shows an icon of bluetooth connected on the upper left of the screen. 2. Select Applet To select java applet. (Note: The first step after bluetooth connected.) 3.
➢ [GetHardwareInfo] to get the information of Bluetooth MAC address and hardware ID. ➢ [GetBatteryState] to get the battery level of the eSecuCard-S. ➢ [GetRTC] to get the real time. ➢ [UpdateRTC] to update the real time. ➢ [InquireKey] to get the button value. (Note: After pressing “InquireKey”, mobile app will be waiting for the button value, and button pressing on the eSecuCard-S is required, or it will return Timeout error.) ➢ [changepin] to change the pin. ➢ [verifypin] to verify the pin. 4.
Note: “Write-and-display” image/text includes writing data into card and displaying data to the screen. For image, the time will be around 22s, while the text is 3s. “Only-display” image will be around 7s, while the text is 3s. 3. Results will be returned and general error refers to Appendix 1. 4.3.2. Contactless Mode 1. Prepare contactless card reader and place eSecuCard-S on the reader. 2. In folder “Displaying test”, select any one script to test eSecuCard-S.
Can read card Charging Card data is being transmitted Blue flashing *eSecuRD uses a standard micro-USB charging cable. *eSecuCard-S uses the contact chip to charge. *eSecuCard-S supports wireless charging, you need to prepare with NFC contactless card reader. 6.
7. Appendix 1 The following tables describe the error status words that may be returned by any commands: ⚫ The following can be modified by users. ⚫ SW1 SW2 Meaning 6E 00 Invalid class 6D 00 Invalid instruction 67 00 Wrong length in Lc 6A 86 Incorrect P1 P2 69 82 Security status not satisfied 69 85 Conditions of use not satisfied 69 8A Fail to setting (eg.
FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.