WIG Industries Company Limited A3/F,, Shouter Industrial Bldg, 16 Hung To Road, Kwan Tong, Kowloon, Hong Kong Fax (852) 2343-5799 Tel (852) 2342-2192. A, Internet Facsimile 686800 RF433 MHz Wireless 4 channel Thermometer ref: \onywrlamericaomarinespringfidchanmel New written for customer’s special operation.
Sensor Buttons Procession Press & hold. silk screened TTX HOLD Press: and hold "2 seconds to send the RESET signal to the base station (hard key top} Operation Guide Install batteries into base station first before RF sensor. Activating Base Station 1. Press and slide open the battery door. Install 2 AA size espalier into the battery compartment according to polarity markings (or label} in the bottom of the battery compartment. Close the battery door. elide the “ON. OFE switch to turn-on the unit 3.
Auto-Scroll function 1f more than one RF sensor iis registered, press “CHANNEL Hold to seck™ button can select Channel 1; Channel 2, Auto Scroll of different channel temperature. C/F Selection Slide the button position to have instant conversion of temperature display Battery Replacement For RF sensor, 1. Low battery icon will appear when the battery of particular RF remote is low. Replace batteries into the RF remote sensor (Don't mix old and new batteries) 2...