User's Manual

ManualsBrandsEvigia Systems ManualsElectronicsFixed RFID Interrogator

EV3-HHI-M

RFID Protocol ISO 18000-7:2008

Frequency 433.92MHz

Antenna Whip antenna

Data Rate 27.7kHz

Range 250 feet unobstructed

Weight 9.2 oz (260.8 g)

Compliance FCC, HERO

EV3-HHI-M with MC-9090

Communications 802.11a/b/g, Bluetooth,

Ethernet or USB when

connected to adapter or

cradle (EV3-HHI-M

removed)

Dimensions 10.25˝L x 4.75˝W x

7.7˝H

Weight 2.16 lb (1Kg)

Operating

Temperature

-20⁰C to +50⁰C

Dust / Moist IP 64

Hand Held Interrogator Module

EV3-HHI-M

In the EV3 solution set, the hand-held interrogator capability can

be achieved by attaching this EV3-HHI-M clip-on-module onto the

Motorola MC9090 hand-held computer. By extending upon the

highly functional MC9090 platform, this ISO18000-7 capable

clip-on module yields a field-robust, and non-incendiary hand-

held platform through which the rest of the EV3 network can be

read, monitored and managed. Where the end-user already has

the hand-held computers on hand, addition of this EV3-HHI-M

module is a highly cost-effective, yet powerful solution path to

enhancing the network’s visibility and capabilities.

NOTE: This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the

interference at his own expense.

WARNING: Changes or modifications not expressively approved

by the party responsible for compliance could void the user's authority

to operate the equipment.

Summary of content (3 pages)

PAGE 1
Hand Held Interrogator Module EV3-HHI-M In the EV3 solution set, the hand-held interrogator capability can be achieved by attaching this EV3-HHI-M clip-on-module onto the Motorola MC9090 hand-held computer. By extending upon the highly functional MC9090 platform, this ISO18000-7 capable clip-on module yields a field-robust, and non-incendiary handheld platform through which the rest of the EV3 network can be read, monitored and managed.
PAGE 2
EVIGIA TAG READER INSTALLATION & COMPLIANCE INFORMATION NOTE: This system must be installed by experienced professional installers who are familiar with radio frequency (RF) equipment operation as well as local building and safety codes. Failure to do so may void the Product Warranty, as well as expose the end user to legal and/or financial liabilities.
PAGE 3
Information to the End User: If your device operates in modes consistent with FCC Part 15.240, then as the end user of this device, you will be responsible for submitting updated information in the event the operating location of this READER changes after the initial installation.