FULL-MOTION TV WALL MOUNT EV2001SD customerservice@everviewmount.
WARNING! * WARNING! SEVERE PERSONAL INJURY AND PROPERTY DAMAGE CAN RESULT FROM IMPROPER INSTALLATION OR ASSEMBLY. READ THE FOLLOWING WARNINGS BEFORE BEGINNING. * If you do not understand the instructions or have any concerns or questions, please contact a qualified installer. * Do not install or assemble if the product or hardware is damaged or missing. Not all parts and hardware * included must be used. If you require replacement parts, contact customer service at customerservice@everviewmount.com.
Supplied Hardware Washers ø6mm B1 Lag Bolts 5/16x23 8 in Washers ø8mm A1 A2 Spacers L15mm bubble level Spacers L5mm x8 x1 x8 B2 B3 C 1PC Philips Screws M6 x 12mm M6 x 30mm D1 D2 Philips Screws M8 x 25mm M8 x 50mm E1 E2 Philips Screws M4 x 12mm M4 x 30mm F1 2PCS F2
Step 1 Before TV bracket installation 75 mm ≈ 2 7/8 in 100 mm ≈ 4 in 200 mm ≈ 7 7/8 in 300 mm ≈ 11 3/4 in 400 mm ≈ 15 3/4 in Measure the distance between the holes located at the back of your TV(these measures may form the shape of a square , or a rectangle) and check that these taken measures are within the VESA(*) range for this wall mount. (*) VESA : International standard established by the TV manufacturers used to determine if LCD/LED TVs are compatible with wall mounts.
Step 2 Install TV bracket Manual Only! D1 M6 x 12mm F1 M4 x 12mm M8 x 25mm E1 B1 C TV TV for your reference Manual Only! D2 M6 x 30mm F2 M4 x 30mm E2 C B1 B2 or C M8 x 50mm B2 TV TV for your reference
Step 3 Ensure the wall plate is securely fastened to the wall before continuing on to the next step. These anchors are for concrete or brick walls ONLY. DO NOT use them in drywall or wood studs. 3-1 Use a stud finder (not included) to locate wood stud. Mark the edge and center locations. 3-2 Ensure marking at the center of the stud.
/32in. 3-3 Drill 4 pilot holes using a 7/32 in. (5.5mm) diameter drill bit. Make sure the depth is not less than 2 3/8" (60mm).er locations. 3-4 LEVEL A2 A1 Mount wall plate using 4 sets of 2 3/8 in lag bolts A1 and washers A2 with a 1/2 in. socket wrench (not included).
Step 4 Mounting your TV to the Brackets and lock it.
Step 5 Post Installation Level If needed, the TV can be leveled +/-3 degrees. 25/64 in.
Step 6 Tilt adjustment If mount can not tilt freely, pls adjust the hardness of nut in both sides.
Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us. Email:customerservice@everviewmount.