Installation Instructions

ManualsBrandsEVERISE INDUSTRIES ManualsElectronics2.4GHz Digital Wireless System

Table Of Contents

Pairing Switch

GND

DC:12-24V

GND

DC:12-24V

3.Connection Introduction

2019.03.11

颜冰

黑白刷

EV-7010MWHD

105*140mm

WITE/04/05-445

PAC-20701000-025

4.Accessories

1. Camera pairing switch

2. Camera power supply: DC12-24V input

3. Monitor power supply: DC12-24V input

2.4G wireless

backup camera

2.4G antenna

2.4G antenna with

3 meters extension

cable

for camera for monitor

Summary of content (4 pages)

PAGE 1
3.Connection Introduction Pairing Switch GND DC:12-24V 1. Camera pairing switch 2. Camera power supply: DC12-24V input 3. Monitor power supply: DC12-24V input GND DC:12-24V 4.Accessories for camera 2.4G antenna with 3 meters extension cable for monitor 2.4G wireless backup camera 2.4G antenna 4 2019.03.
PAGE 2
Attention For your safety, Do not watch video or set monitor while driving. Non-professional please do not disassemble the product at will, please consult the after-sales service organization when the product malfunctions, or send it to the local maintenance department for inspection and repair. Attention......................................................................... 1 Function And Parameter Introduction.............................. 1-2 Product Introduction........................................
PAGE 3
5. Waterproof rating: IP69 6. 2.4G Wireless transmission distance up to 150m in open area 7. Power supply: DC12V～24V 8. Power consumption: 3W 9. Working temperature: -20℃~60℃ 9. Storage temperature: -10℃~70℃ 10.Size: 86.5* 74.5* 77mm Menu Setting Press the “MENU” key on the panel, can open the option of the “contrast”, “saturation” and “brightness” in menu, press “ ▶ ” or “ ◀ ” to set the “contrast”, “saturation” and “brightness” of the camera, pictures below: 2.
PAGE 4
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.