Approval Sheet Product Specification Part Description: BLUETOOTH MODULE Customer Part No: BIGSOLON Part No: BT-TYPE-A Acknowledgement of reception We have received the attached specification Date 2022. 03. 30 Company EVERINT Dept. BIXOLON R&D LAB Representative Dong-gil.
Revision Record No Date 1 2022. 03.
1. Module Features - Complies with Bluetooth Core Specification version 5.0 - Up to 96MHz integrated ARM M3 micro-controller - Built-in Reference Clock: 24MHz - RoHS Compliant 2. Applications - Home automation gateways - Heart rate monitors - Wearables - Thermometers - Blood pressure monitors - Mobile 3. Features - Size (14mm X 13mm X 3mm ) - Surface Mountable 4. Electrical Characteristics Parameter Min Nor Max Unit Supply Voltage (VBAT, VDD_IO) 3.0 3.3 3.
6. Pin Description Pin No.
24 GPIO_7 General_purpose I/O 25 RST_N Active-low reset input 26 GPIO_5 General_purpose I/O 27 GND Ground connection 28 GND Ground connection 29 GND Ground connection 30 BT_RF RF I/O antenna port 31 GND Ground connection 32 GND Ground connection
7.
8. Layout and partlist Product Spec Manufacturing Manufacturer company part number 1 MOVON MD-BCC210 U10 Quantity Name MODULE BLUETOOTH V5.0,CYW20706,UART+I2C+SPI Location R-CHIP 0ohm,5%,0402,SMD 2 WALSIN WR04X000PTL R58, R117 C-CHIP 2pF,50V,±0.25p,0402,SMD 1 SAMSUNG CL05C020CB5ANNC C27 ANTENNA F-TYPE ,2.
9.
[Approval Sheet] 2022. 03. 30 Nice Korea Components Co.
- Contents - 1. Revision History 2. Features & Applications 3. Electrical Specifications 4. Antenna Dimensions 5.
1.
2. Features & Applications 2.1 Features This ceramic chip antenna is applied to 2.4 GHz ISM band applications, i.e. Bluetooth. Zigbee, Wireless LAN, etc… Shape Bulk Ceramic Dielectric AI2O3(Alumina) Electrode Ag Texture L = 10±0.1 Size(mm) W = 2±0.1 T = 1.2±0.
3. Electrical Specifications 3-1. * All item are measured in room temperature (24~26 ‘C). * All item are measured at customer set condition.
3-2. VSWR of USER SET condition Antenna Characteristics Measurement result Antenna dielectric constant(Er) 9.5(±0.5) 2.4GHz Zo = -48Ω(±10) 2.45GHz Zo = -29Ω(±10) 2.
3-3.
4. Ag pattern 5. Marking View Input Mark Product name ( No.) Only TOP part 5-1.
EVERINT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RSS-102 RF Exposure L’antenne (ou les antennes) doit être installée de façon à maintenir à tout instant une distance minimum de au moins 20 cm entre la source de radiation (l’antenne) et toute personne physique. Cet appareil ne doit pas être installé ou utilisé en conjonction avec une autre antenne ou émetteur. IMPORTANT NOTE This device complies with FCC & ISED radiation exposure limits set forth for an uncontrolled environment.
Important Notice to OEM integrators 1. This module is limited to OEM installation ONLY. 2. This module is limited to installation in mobile or fixed applications, according to Part 2.1091(b). 3. The separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations 4. For FCC Part 15.31 (h) and (k): The host manufacturer is responsible for additional testing to verify compliance as a composite system.
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID/IC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC/IC authorization. List of applicable FCC rules This module has been tested and found to comply with part 15.
