Spec Sheet

EPOE16E
16-port 10/100M PoE + 2 Gigabit Copper/SFP Combo Rackmount Web Smart PoE Switch
 16-Port 10/100BaseT(X) with 16 PoE +
2-Port Gigabit Copper/SFP Combo Uplink
 IEEE 802.3at PoE+, up to 30W per port
 Maximum 250W power consumption
 Web-based Configuration and Management
 VLAN, QoS, RSTP, IGMP Snooping, LACP,
Port Security, Bandwidth Control, Storm
Control
 19” Racmount
Key Features
IEEE 802.3at Power over Ethernet (PoE) ports
EPOE16E features IEEE 802.3at Power over Ethernet (PoE) ports supplying Maximum 250 Watt.
This product can convert standard 100~240V/AC power into low-voltage DC that runs over existing
LAN cable to power up IEEE 802.3at compliant network accessories. It also features PoE awareness
to verify whether the network device receive power is IEEE 802.3at compliant, or only the data will
be sent through LAN cable. By adding EPOE16E to existing networking, installing networking
products such as Access Points and IP cameras can be easily managed and set up. Wireless device
deployments are easily located with available power outlets and network administrators don’t
need to use heavy AC power adapters anymore.
2 Gigabit Copper/SFP Combo Port
EPOE16E supports 2 Combo Gigabit Copper or 2 SFP open slots to uplink to servers, storage, or
other switching devices for long loop reach applications
Exceptionally Smart
The EPOE16E features management interface that can be managed through Web Browser and it
provides Smart features that are ideal for simple network applications and basic monitoring tools
to improve network efficiency. Through a Web-based interface, an administrator can set up VLANs
to segregate traffic, QoS to prioritize mission-critical data, RSTP/Loop Protection to avoid network
loop, link aggregation to create fat traffic pipelines, bandwidth control to limit traffic load and Port
Security to secure your network. All of these features offer extra protection on the network edge.
Best of all, the password-protected configuration interface can be accessed remotely.
EPOE16E
16-port 10/100M PoE + 2 Gigabit Copper/SFP Combo Rackmount Web Smart PoE Switch
 16-Port 10/100BaseT(X) with 16 PoE +
2-Port Gigabit Copper/SFP Combo Uplink
 IEEE 802.3at PoE+, up to 30W per port
 Maximum 250W power consumption
 Web-based Configuration and Management
 VLAN, QoS, RSTP, IGMP Snooping, LACP,
Port Security, Bandwidth Control, Storm
Control
 19” Racmount
Key Features
IEEE 802.3at Power over Ethernet (PoE) ports
EPOE16E features IEEE 802.3at Power over Ethernet (PoE) ports supplying Maximum 250 Watt.
This product can convert standard 100~240V/AC power into low-voltage DC that runs over existing
LAN cable to power up IEEE 802.3at compliant network accessories. It also features PoE awareness
to verify whether the network device receive power is IEEE 802.3at compliant, or only the data will
be sent through LAN cable. By adding EPOE16E to existing networking, installing networking
products such as Access Points and IP cameras can be easily managed and set up. Wireless device
deployments are easily located with available power outlets and network administrators don’t
need to use heavy AC power adapters anymore.
2 Gigabit Copper/SFP Combo Port
EPOE16E supports 2 Combo Gigabit Copper or 2 SFP open slots to uplink to servers, storage, or
other switching devices for long loop reach applications
Exceptionally Smart
The EPOE16E features management interface that can be managed through Web Browser and it
provides Smart features that are ideal for simple network applications and basic monitoring tools
to improve network efficiency. Through a Web-based interface, an administrator can set up VLANs
to segregate traffic, QoS to prioritize mission-critical data, RSTP/Loop Protection to avoid network
loop, link aggregation to create fat traffic pipelines, bandwidth control to limit traffic load and Port
Security to secure your network. All of these features offer extra protection on the network edge.
Best of all, the password-protected configuration interface can be accessed remotely.
EPOE16E
16-port 10/100M PoE + 2 Gigabit Copper/SFP Combo Rackmount Web Smart PoE Switch
 16-Port 10/100BaseT(X) with 16 PoE +
2-Port Gigabit Copper/SFP Combo Uplink
 IEEE 802.3at PoE+, up to 30W per port
 Maximum 250W power consumption
 Web-based Configuration and Management
 VLAN, QoS, RSTP, IGMP Snooping, LACP,
Port Security, Bandwidth Control, Storm
Control
 19” Racmount
Key Features
IEEE 802.3at Power over Ethernet (PoE) ports
EPOE16E features IEEE 802.3at Power over Ethernet (PoE) ports supplying Maximum 250 Watt.
This product can convert standard 100~240V/AC power into low-voltage DC that runs over existing
LAN cable to power up IEEE 802.3at compliant network accessories. It also features PoE awareness
to verify whether the network device receive power is IEEE 802.3at compliant, or only the data will
be sent through LAN cable. By adding EPOE16E to existing networking, installing networking
products such as Access Points and IP cameras can be easily managed and set up. Wireless device
deployments are easily located with available power outlets and network administrators don’t
need to use heavy AC power adapters anymore.
2 Gigabit Copper/SFP Combo Port
EPOE16E supports 2 Combo Gigabit Copper or 2 SFP open slots to uplink to servers, storage, or
other switching devices for long loop reach applications
Exceptionally Smart
The EPOE16E features management interface that can be managed through Web Browser and it
provides Smart features that are ideal for simple network applications and basic monitoring tools
to improve network efficiency. Through a Web-based interface, an administrator can set up VLANs
to segregate traffic, QoS to prioritize mission-critical data, RSTP/Loop Protection to avoid network
loop, link aggregation to create fat traffic pipelines, bandwidth control to limit traffic load and Port
Security to secure your network. All of these features offer extra protection on the network edge.
Best of all, the password-protected configuration interface can be accessed remotely.