Instruction Manual

Instruction Manual
Remote control
Item no. Transmitter EMW202ST
A. Functions
1. Fix code, no need to pair
2. Manual button to control receiver ON/OFF.
B. Diagram
No.
Description
Function
1
LED indicator
Light up when ON/OFF button is pressed
2
ON OFF
Switch ON/OFF the receiver
C. Instruction
a) Take off the insulation sheet from the battery cover on the back of the remote
b) Press ON/OFF button on the transmitter to switch the receiver ON/OFF
c) If the LED indicator does not light when the ON/OFF button is pressed, please replace the battery
D. Caution
1. When the battery of transmitter is in low voltage, it influences product transmitting distance
E. Specification
Transmitter battery: CR2032 DC3V
Frequency: 433.92 MHz
Distance: Up to 25 meters in open area
FCC CAUTION:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
2
1