Instruction Manual

Instruction Manual

Remote control

Item no. Receiver RF102R-UL and Transmitter RF102T5

A. Functions

1. Learning code system

2. Manual button on each receiver for ON/OFF control.

3. All ON/All OFF control

B. Diagram

No.

Description

Function

ALL ON

ALL OFF

Switch ON/OFF all the paired receivers

ON OFF

Switch ON/OFF the paired receiver

Manual

Button

Switch ON/OFF the receiver;

press over 3 seconds on transmitter to pair with selected receiver

or delete paired transmitters.

LED indicator

LED ON/OFF indicates receiver power ON/OFF; LED flashes

means receiver is under pairing mode

PAGE 1
Instruction Manual Remote control Item no. Receiver RF102R-UL and Transmitter RF102T5 A. Functions 1. Learning code system 2. Manual button on each receiver for ON/OFF control. 3. All ON/All OFF control B. Diagram 1 2 3 No.
PAGE 2
C. Instruction 1. Pairing a) Plug the receiver into an outlet, the LED indicator flashes (under pairing mode), press the ON or OFF button on the transmitter (select one from 1-5, number means different channels). If the LED is not under pairing mode, press the manual button over 3 seconds to turn the receiver into pairing mode. b) LED stop flashing, pairing success.
PAGE 3
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment, This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC WARNING: This device complies with Industry Canada licence-exempt RSS standard(s).