Instruction Manual

Instruction Manual for
RF Remote Transmitter
Ref: EMW202T-1
A. Function
1. Fix code
2. Please use together with the receivers in the same pack set
3. This product is intended to control the connected receivers ON/OFF
B. Diagram
NO.
Introduction
Function
1
LED Indicator
Indicate the receiver's working status
2
ON/OFF
Control the related receiver ON/OFF
C. Instruction
1. Plug the receiver into an outlet
2. Remove the insulating strap from the back of the transmitter
3. Press ON/OFF button on the transmitter to switch the related channel's receiver ON/OFF
D. Caution
1. Low battery voltage in the transmitter would impact the transmitting distance.
2. If LED indicator doesnt light up or becomes dark when press the buttons, please change
the battery
E. Specification
Transmitter battery CR2032L DC3V
Frequency 433.92 MHz
Effective distance 25 meters (open area)
2
1

Summary of content (3 pages)