User Manual

Instruction Manual for

Remote Control Receiver+ Remote Control Transmitter

Ref: 30UL/RF+EMW301TK

Function

1. The remote control socket (30UL/RF) turns on and off the connected lighting or

appliance by a wireless transmitter (EMW301TK) using radio frequency up to 30 meters

away.

2. It is ideal for controlling lighting for the purposes of home automation and energy

saving.

30UL/RF EMW301TK

Operation

1. Connect the remote control socket to the mains power supply.

2. Press the corresponding “ON”, “OFF” buttons on the transmitter to switch on

and off the connected appliance by remote control.

3. The indicator on the receiver blink once for every reception of power on/off.

PAGE 1
Instruction Manual for Remote Control Receiver+ Remote Control Transmitter Ref: 30UL/RF+EMW301TK Function 1. The remote control socket (30UL/RF) turns on and off the connected lighting or appliance by a wireless transmitter (EMW301TK) using radio frequency up to 30 meters away. 2. It is ideal for controlling lighting for the purposes of home automation and energy saving. 30UL/RF EMW301TK Operation 1. Connect the remote control socket to the mains power supply. 2.
PAGE 2
Specifications 30UL/RF 1. Power Rating : 125V~, 50Hz, 1875W; 1250W(Tungsten) 2. Frequency: 433.92MHz 3. Distance: 30 meters EMW301TK 1. Battery : CR2032 1×3VDC 2. Frequency : 433.92MHz 3. Distance : 30meters max. 4. Working temperature:-20 - 55°C Manufacturer Logo: Factory:Everflourish Electrical Co., Ltd. Address: Renjiu Village, Wuxiang Town, Yinzhou Ningbo 315111 P.R. China Caution: This device complies with Part 15 of the FCC Rules.
PAGE 3
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver.