User's Manual

Instruction Manual

New TouchSmartSunsmart 7 day timer

Item no. EMW2600TS

A. Functions

1 An ideal device to control you appliance on/off automatically or timer setting by one push button.

2 The transmitter and receiver use a fixed code system, no pairing required.

3 Remote control transmitter is with a blue backlight LCD for showing current time and function mode.

4 Each function button has a LED indicator showing the program status whenever the LCD light is on

B. Diagram

Button

Function

1. press / to adjust time by minute, for real time, countdown and

myon/my off time setting

2. press and hold to adjust continuously

1. under normal mode, press and hold for 4 seconds to set the current time

2. under function mode, works as the confirm button

my on time

1. Press to select MY ON time, time display blinks

2. Press / button to set MY ON time

3. Press one more time tocancelprogram setting

my off time

1. Press to select MY OFF time, time display blinks

2. Press / button to set the MY OFF time

3. Press one more time to cancel program setting

Sunset on

Press to select Sunset on function, press again to cancel

Sunrise off

Press to select Sunrise off function, press again to cancel

countdown

1. Press to select Countdown function, time display flashes

2. Press / button to set the countdown time (default time is 1hour) Press again to cancel

program setting

My extra

programs

1. Press to select extra program function

Press to turn on the background light, press again to turn off

Reset button, press to clear all clock and programs settings

C. Connection

1 For safety use, please switch off your appliance before plugging in the device

2 Set your timer program

3 Connect your appliance to the device and plug the device to an outlet

D. Instruction Procedures

PAGE 1
Instruction Manual New TouchSmartSunsmart 7 day timer Item no. EMW2600TS A. Functions 1 2 3 4 An ideal device to control you appliance on/off automatically or timer setting by one push button. The transmitter and receiver use a fixed code system, no pairing required. Remote control transmitter is with a blue backlight LCD for showing current time and function mode. Each function button has a LED indicator showing the program status whenever the LCD light is on B. Diagram Button Function 1.
PAGE 2
1 2 3 4 Set current time: press / to set the current time Set date and time zone: press and hold for 4 seconds, under "set" blinks, press / to set current time, press to confirm. “YEAR” shows for 3 seconds then year blinks, press / to set the year, press to confirm; same steps to set month, day, time zone and DST. Press different function button to set your preferred on/off time and operation circuit, LED indicator turns on to show the program you selected: a. my on time: set your ideal ON time b.
PAGE 3
Industry Canada (IC) CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la norme RSS d'Industrie Canada.