User's Manual

EMW200R-UL+EMW203T (E).doc, P1/2

Instruction Manual for

RF Remote Socket and Transmitter

Ref: EMW200R-UL + EMW203T

Function

1. The remote control socket turns on and off the appliance by a wireless transmitter using radio frequency up to

25 meters away.

2. It is ideal for controlling appliance for the purposes of home automation and energy saving.

3. Each transmitter controls up to 3 channels. Each channel can command up to 3 receivers.

Operation

1. Check the group setting at the back of the transmitter, A, B, C or D. If the transmitter is in group A, then, the

commanded receiver has to be in the same group setting.

2. Check the group setting at the back of the receiver is same as transmitter and the channel no, eg. A1, A2 or

3. Connect the remote control socket to the mains power supply.

4. Press the corresponding “ON”, “OFF” buttons on the transmitter to switch on and off the connected appliance

by remote control. (eg. on/off buttons 1 controls receiver A1, 2 controls receiver A2, 3 controls A3)

5. The indicator on the receiver blink once for every reception of power on/off

Caution

1. For safety reason, always switch off your appliance before connection and avoid setting up on rainy days.

2. Appliances to be connected to the remote control socket MUST NOT exceed the voltage and frequency

ratings as in “Specifications”.

3. To adjust the channel or the groups, always use a big screw driver with the same diameter as the adjustment

arrow at the back of the socket and receiver. A small screw driver will deform the plastic housing during

adjustment.

Specifications

EMW200R-UL,

1. Power Rating

: 125V~, 60Hz, 1000W

2. Frequency: : 433.92 MHz

3. Distance: : 25 meters

EMW203T

Battery : CR2032

Frequency : 433.92 MHz

1. Distance : 25 meters max.

Holder:

Everflourish Electrical Co., Ltd.

Renjiu Village, Wuxiang Town, Yinzhou, Ningbo, 315111 P.R. China

PAGE 1
Instruction Manual for RF Remote Socket and Transmitter Ref: EMW200R-UL + EMW203T Function 1. The remote control socket turns on and off the appliance by a wireless transmitter using radio frequency up to 25 meters away. 2. It is ideal for controlling appliance for the purposes of home automation and energy saving. 3. Each transmitter controls up to 3 channels. Each channel can command up to 3 receivers. Operation 1. Check the group setting at the back of the transmitter, A, B, C or D.
PAGE 2
Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Prudence： Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.