User's Manual

Instruction Manual for

RF Remote Socket and Transmitter

Ref: EMW202TS + EMW202US/RF

Function

1. The remote control socket turns on and off the connected lighting or appliance by a wireless

transmitter using radio frequency up to 80 feet away.

2. It is ideal for lighting control, for the purposes of home automation and energy saving.

3. The receiver has the indicator light for power supply status.

4. The transmitter is with key for convenience use.

Operation

1. No setting is required.

2. Connect the remote control socket to the power supply.

3. Turn off the appliance before connecting to the remote control.

4. Remove the plastic tab at the battery holder on the transmitter to allow battery contact.

5. Press the corresponding thin and thick key on the transmitter to switch on and off the

connected appliance by remote control

6. The indicator on the transmitter blinks once for every transmission of power on/off

7. When the indicator light on the transmitter dims, battery changing is recommended. Open the

battery holder and replace it.

Caution

1. Always switch off your appliance before connection.

2. For INDOOR USE ONLY

3. Appliances to be connected to the remote control socket MUST NOT exceed the voltage and

frequency ratings as in “Specifications”.

Specifications

EMW202US/RF

1. Power Rating : 120VAC, 60Hz,

2. Resistive load: 1000W max.

3. Frequency: : 433.92 MHz

4. Distance: : up to 80 feet in open area

EMW202TS

1. Battery : CR2032 3VDC (included)

2. Frequency : 433.92 MHz

3. Distance : up to 80 feet in open area

PAGE 1
Instruction Manual for RF Remote Socket and Transmitter Ref: EMW202TS + EMW202US/RF Function 1. The remote control socket turns on and off the connected lighting or appliance by a wireless transmitter using radio frequency up to 80 feet away. 2. It is ideal for lighting control, for the purposes of home automation and energy saving. 3. The receiver has the indicator light for power supply status. 4. The transmitter is with key for convenience use. Operation 1. No setting is required. 2.
PAGE 2
Caution: This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Prudence Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.