User's Manual

Instruction Manual for

RF Remote Control Socket and Transmitter

EMW200R-UL，

，，

，EMW200RA-UL, the remote control socket

EMW200T-1，

，，

，EMW200TA-1, the hand held transmitter

As always follow electrical safety precautions, do not use with unattended appliances or those involving

heating elements.

Function

1. The remote control socket (EMW200R-UL，EMW200RA-UL) turns on and off the connected lighting or

appliance by a wireless transmitter (EMW200T-1，EMW200TA-1) using radio frequency up to 80ft away.

2. It is ideal for controlling lighting for the purposes of home automation and energy saving.

3. Each transmitter controls up to 3 channels. Each channel can command up to 3 receivers.

Operation

1. Check the group setting at the back of the transmitter, A, B, C or D. If the transmitter is in group A, then, the

commanded receiver has to be in the same group setting.

2. Check the group setting at the back of the receiver is same as transmitter and the channel no, eg. A1, A2 or A3

3. Connect the remote control socket to the mains power supply.

4. Press the corresponding “ON”, “OFF” buttons on the transmitter to switch on and off the connected appliance by

remote control. (eg. on/off buttons 1 controls receiver A1, 2 controls receiver A2, 3 controls A3)

5. The indicator on the receiver blink once for every reception of power on/off

Caution

1. For safety reason, always switch off your appliance before connection.

2. Appliances to be connected to the remote control socket MUST NOT exceed the voltage and frequency ratings

as in “Specifications”.

3. User can adjust the channel group on the transmitter and socket receiver at any time. And to change the group

setting, eg. From A1 to A2, or to A3, in order to change the control button position on the transmitter.

4. To adjust the channel or the groups, always use a big screw driver with the same diameter as the adjustment

arrow at the back of the socket and receiver. A small screw driver will deform the plastic housing during

adjustment.

Specifications

EMW200R-UL，

，，

，EMW200RA-UL

1. Power Rating : 125V~, 8A, resistive, 625W tungsten

2. Frequency: : 433.92 MHz,

3. Distance: : 80ft max. (open area)

EMW200T，

，，

，EMW200TA

1. Battery : 23A 3L R50 12V

2. Frequency : 433.92 MHz

3. Distance : 80ft max. (open area)

PAGE 1
Instruction Manual for RF Remote Control Socket and Transmitter EMW200R-UL，，EMW200RA-UL, the remote control socket EMW200T-1，，EMW200TA-1, the hand held transmitter As always follow electrical safety precautions, do not use with unattended appliances or those involving heating elements. Function 1. The remote control socket (EMW200R-UL，EMW200RA-UL) turns on and off the connected lighting or appliance by a wireless transmitter (EMW200T-1，EMW200TA-1) using radio frequency up to 80ft away. 2.
PAGE 2
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.