User's Manual

Everex Communications, Inc

WT-22 User’s Manual:

WT-22 is a thermostat with a wireless radio which controls the setting of

an Air Conditioning/Heating (AC/Heating) unit based on user’s inputs. The

thermostat consists of a LCD display which shows the current setting to the user,

an occupancy sensor which detects the state of occupancy and 5 buttons for

user’s setting. The unit can be powered by 4 AA batteries or from a low voltage

external power source.

There are 5 buttons on the unit, namely Mode, Fan Speed, Constant Fan ,

Up Arrow and Down Arrow. The following are the functions of these buttons.

MODE – To select OFF, HEAT or COOL mode.

FAN SPEED – To change the speed of the fan to HIGH speed or LOW speed

setting.

CONSTANT ON– To set fan to be always on.

UP Arrow/DOWN Arrow – To increase (Up) or decrease (Down) temperature

setting.

The LCD displays the current setting of the thermostat. If the user

changes the setting of the AC/Heating unit, the WT-22 will also update the LCD

display to match the setting of the AC/Heating unit.

PAGE 1
Everex Communications, Inc WT-22 User’s Manual: WT-22 is a thermostat with a wireless radio which controls the setting of an Air Conditioning/Heating (AC/Heating) unit based on user’s inputs. The thermostat consists of a LCD display which shows the current setting to the user, an occupancy sensor which detects the state of occupancy and 5 buttons for user’s setting. The unit can be powered by 4 AA batteries or from a low voltage external power source.
PAGE 2
Installation Pull the plastic cover from the base plate. Mount the base plate onto the wall where there is a good circulation of air. Install 4 AA alkaline batteries to the battery holders or connect the external power source wiring to the screw terminal. Press the push button to bind WT-22 radio to a host device. Once they are bound, install the plastic cover back onto the base plate.