User's Manual

IEverex Communications, Inc
WX-21 User’s Manual
WX-21 is a wireless sensor which records the measurement data until the
data is successfully sent to its host device. WX-21 operates on 2 AA alkaline
batteries or from a low voltage external power source.
WX-21 is to be mounted on the side of a wall, clear of obstruction, where it
can make accurate measurement.
Installation
Pull the plastic cover from the base plate. Mount the base plate onto the
wall.. Install 2 AA alkaline batteries to the battery holder or insert the external
power source wires into J4. Wait for WX-21 to communicate with the host.
Install the cover back onto the base plate.
WX-21
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,

Summary of content (2 pages)