Installation Guide

ManualsBrandsEverBloom ManualsGarden Center3 ft. W x 2 ft. D x 33 in. H Premium Elevated Blossom

Elevated Garden Bed

3’ L x 2’ W x 33” H

Installation Guide

Please Read the instructions carefully to familiarize yourself with every detail

and step involved. Keep this manual for future reference. Find a suitable

space to assemble the Everbloom Garden Bed.

You need at least 38.5” x 28” (71 x 98cm) for the finished product. A flat and

firm area (like a garage floor or flat yard space) is perfect! The only tool you

may need is a rubber mallet.

BEFORE YOU START

IMPORTANT NOTES

Small parts are included; we advise you to keep them away from children

and pets.

We also suggest having another person help you assemble.

Load capacity: approximately 4 cu. ft. of soil

ERB3332

Summary of content (12 pages)

PAGE 1
ERB3332 Elevated Garden Bed 3’ L x 2’ W x 33” H Installation Guide BEFORE YOU START Please Read the instructions carefully to familiarize yourself with every detail and step involved. Keep this manual for future reference. Find a suitable space to assemble the Everbloom Garden Bed. You need at least 38.5” x 28” (71 x 98cm) for the finished product. A flat and firm area (like a garage floor or flat yard space) is perfect! The only tool you may need is a rubber mallet.
PAGE 2
PARTS LIST 33" Elevated Garden Bed 6 holes Top 7 holes Top 6 holes Right Corner Post X2 7 holes Left Corner Post X2 Bottom Long Board X2 Long Support Board X2 Bottom 960mm 960mm Short Board X4 Bottom Board X5 600mm 647mm Garden Bed Liner X1 Post Cap X8
PAGE 3
ASSEMBLY 1 33" Elevated Garden Bed Start by making sure each corner post is oriented correctly. Reference image 1 and ensure that the 7 holes are on the bottom half of the standing corner posts. Slide one short board into the corner brackets from above. Note: The short boards need to be placed in the inward “U” shape of the brackets. (Image 2).
PAGE 4
ASSEMBLY 2 33" Elevated Garden Bed Slide the long support boards into the corner posts, as shown in Image 3.
PAGE 5
ASSEMBLY 3 33" Elevated Garden Bed Carefully flip over the garden bed so that it lays flat with the long support boards pointing towards the sky. Slide the bottom boards through the slots of the long support boards. All 5 boards can be slided in now.
PAGE 6
ASSEMBLY 43 33" Elevated Garden Bed Carefully Slide the remaining flip over thecorner garden posts bedinto so place that it lays as shown flat with in Image the long5.support Ensure that boards the pointing directiontowards of the each the sky. post Slide is the symmetric bottomfor boards the remaining through the short slots board. of the long support boards. All 5 boards can be slided in now.
PAGE 7
ASSEMBLY 5 33" Elevated Garden Bed Slide one short board into the corner brackets, as shown in Image 6.
PAGE 8
ASSEMBLY 6 33" Elevated Garden Bed Flip over the bed so it stands upright. Slide the remaining boards into place, as shown in image 7.
PAGE 9
ASSEMBLY 7 33" Elevated Garden Bed Use the rubber mallet to ensure the boards are tightly in place. Cover the brackets with the 8 end caps, as shown in Image 8.
PAGE 10
ASSEMBLY 8 33" Elevated Garden Bed Unfold the liner and cover the bottom of the garden bed, as shown in Image 9 and Image 10. Note: The liner is water-proof. You can use a needle to puncture the liner if you want water to fall through the bottom boards.
PAGE 11
ASSEMBLY 9 33" Elevated Garden Bed If you purchased the separately sold caster wheels and/or shelf brackets, as shown in Image 11 and Image 12, please reference their accessory instruction manual for assembly details. They are adjustable and can enrich the experience with your new Everbloom Garden Bed! Note: Interested in buying caster wheels or shelf brackets? Visit our website at “www.everbloom-garden.
PAGE 12
Questions or Comments? Email us at service@everbloom-garden.com Welcome to our website: www.everbloom-garden.com Distributed by: Dynaforge Trading LLC St. Paul, MN55101 Email: service@everbloom-garden.