Planter Box Cornerstone Installation Guide Thank You! You’re only a few steps away from your perfect vegetable garden or elevated planter. We hope you enjoy! Model# E211719 / E211719G Dimensions 17" L x 19" W x 21" H Before You Start Please read the instructions carefully to familiarize yourself with every detail and step involved. Keep this manual for future reference. Find a suitable space to assemble your new Planter Box. You need at least 18” x 20” (46 x 51cm) for the finished product.
Parts List Planter Box Cornerstone - 17" L x 19" W x 21" H Left Corner Post X2 Right Corner Post X2 Top Top Short Board A X8 Short Board B X4 420mm 420mm Bottom Board X2 460mm Bottom Bottom Post Cap X4 Garden Bed Liner X1 + 2pc replacement 2
Assembly Planter Box Cornerstone - 17" L x 19" W x 21" H Four depths are available by changing the sequence of the boards and position of the bottom boards, as shown in below images. You can choose according to different needs first. * For depth of 16.9” and 10” as shown in Image 1, please refer to steps from page 4. * For depth of 14.4” and 7.5” as shown in Image 2, please refer to steps from page 10. IMAGE 1 Depth 1 - 16.9” from page 4 Long Board Long Board Depth 2 - 10” from page 4 Long Board 16.
Assembly Planter Box Cornerstone - 17" L x 19" W x 21" H For the deepest planting depth of 16.9”, please follow steps below. For depth of 10”, the assembly methods are similar, just pay attention to the sequence of the boards and position of the bottom boards, please refer to page 3. Start by making sure each corner post is oriented correctly, as shown in Image 3. Slide one short board B into the corner brackets from above.
Assembly Planter Box Cornerstone - 17" L x 19" W x 21" H Slide another short board B into the other two corner brackets from above, as shown in Image 5.
Assembly Planter Box Cornerstone - 17" L x 19" W x 21" H With the help of another person holding the 2 assembled parts, slide another short boards B into the brackets from above. Make sure that one board goes straight to the bottom, while the other one stays in the middle of the way (don’t push it to the bottom), with the top edge between the 5th and 6th holes of the post.
Assembly Planter Box Cornerstone - 17" L x 19" W x 21" H Put the bottom boards on lower slots of short boards B. Make sure the 2 ends of these bottom boards go into the lower slots and rest in them with enough contact as shown in Image 7. Adjust the height of the higher short board B slightly to hold these bottom boards if necessary.
Assembly Planter Box Cornerstone - 17" L x 19" W x 21" H Push down the higher short board B to the bottom, as shown in Image 8.
Assembly Elevated Planter Box - 17" L x 19" W x 28" H Slide the remaining boards into place, as shown in Image 9. Now you get an planter box cornerstone with 10” planting depth. Then, go to page 15, and follow the steps afterwards. Note: If you want to add trellis kit onto this bed, please assemble the extension connectors before this step, to avoid disassembling the boards later.
Assembly Planter Box Cornerstone - 17" L x 19" W x 21" H For the planting depth of 14.4”, please follow steps below. For depth of 7.5”, the assembly methods are similar, just pay attention to the sequence of the boards and position of the bottom boards, please refer to page 3. Start by making sure each corner post is oriented correctly, as shown in Image 3a. Slide one short board B into the corner brackets from above.
Assembly Planter Box Cornerstone - 17" L x 19" W x 21" H Slide another short board B into the other two corner brackets from above, as shown in Image 5a.
Assembly Planter Box Cornerstone - 17" L x 19" W x 21" H With the help of another person holding the 2 assembled parts, slide another two short boards B into the brackets from above to the bottom, as shown in Image 6a.
Assembly Planter Box Cornerstone - 17" L x 19" W x 21" H Put the bottom boards on the short boards B, as shown in Image 7a.
Assembly Planter Box Cornerstone - 17" L x 19" W x 21" H Slide the remaining boards into place, as shown in Image 8a. Now you get a planter box cornerstone with 7.5” planting depth. Note: If you want to add trellis kit onto this planter box, please assemble the extension connectors before this step, to avoid disassembling the boards later.
Assembly Planter Box Cornerstone - 17" L x 19" W x 21" H If necessary, use your rubber mallet to ensure the boards are tightly in place. Cover the brackets with the 4 end caps, as shown in Image 10.
Assembly Planter Box Cornerstone - 17" L x 19" W x 21" H Unfold the liner and cover the bottom of the garden bed, as shown in Image 11 and Image 12.
Note Planter Box Cornerstone - 17" L x 19" W x 21" H Sometimes there might be a misalignment of the Corner Posts as shown in Image 13 and Image 14, which may result in difficulty of sliding boards into the brackets. Please adjust them to the right position so that they are parallel to each other, and perpendicular to the ground.
Bloom On. Everbloom-Garden.com US Patent Pending Subscribe at www.everbloom-garden.com for extra savings and upgrading information! Distributed by: Dynaforge Trading LLC St. Paul, MN55101 Email: service@everbloom-garden.
