Instructions / Assembly

Steel Sunburst Baseboard Grille and Register Installation

Instructions

Page 1 of 2

Step 1

Remove the face of the grille/registers. With the grille/register sitting on a table, facing you, place the tip of

each of your index fingers under the tabs located in the upper corners. Place your thumbs on top of the

grille/registers. Using your index fingers, pull the top of the face toward you.

PAGE 1
Steel Sunburst Baseboard Grille and Register Installation Instructions Step 1 Remove the face of the grille/registers. With the grille/register sitting on a table, facing you, place the tip of each of your index fingers under the tabs located in the upper corners. Place your thumbs on top of the grille/registers. Using your index fingers, pull the top of the face toward you.
PAGE 2
Steel Sunburst Baseboard Grille and Register Installation Instructions Step 2 Position the grille/register over the duct opening in the floor. Step 3 Using the screws that were provided, secure the base of the sunburst baseboard grille/register to the floor and/or wall. Step 4 To repalce face, first align tabs on base with slot on bottom of face. Pivot face up and snap closed.