User's Manual

User manunal
The device which was inserted to the REMOTO is the DONGLE, and the handle port
is NUNCHUCK.
1.Connect the WII correctly, in order to make the REMOTE work normally.
2.Insert the DONGLE to the REMOTE, then the DONGLE will start automatically
and the LED will blink. At this moment, if you press the key “LINK” for one second,
the LED will blink more rapidly.
3. Load the 2*AAA battery to the NUNCHUCK, then press the POWER key to start it
(pressing any key can start it) .If the LED blinks, it expresses it starts normally. Then
press the key “LINK”, it will connect with the DONGLE after 1 to 3 seconds. When
the LED of NUNCHUCK and DONGLE are on, it stands for connecting successfully.
Remarks: Step 2 and 3 above, which should be operated when the equipment was
connected firstly. If the equipment had been connected before, it needn’t connect
again. And when you start it, it will be connected automatically without pressing any
key.
4. we can play games normally after connecting correctly.
5. We can turn off the DONGLE by pressing the POWER key of DONGLE for three
seconds, and we can start it by pressing the POWER key. So does the NUNCHUCK
POWER key.
6. Put the optical disk “WII SPORTS” into the WII, and join the games according to
the operating hints, and choose the BOXING to play games. (You must choose the
BOXING to join games firstly, because the other games can’t support NUNCHUCK)