User's Manual

Zero Wireless Controller for PS-2 Item 80595

Thank you for purchasing the Nyko Zero Controller for the Playstation 2 entertainment

system. This device is designed to provide a comfortable and reliable game play control

for your PS-2. Please review the instructions below to ensure proper installation and use

of this product.

FEATURES

• Stylish, ergonomic design for maximum comfort and control

• Metal and Plastic hybrid construction, for style, durability and comfort

• Includes Rechargeable NiMH battery pack, USB Recharging cable, and optional

AA battery compartment

• Back Lit Action buttons for easy button recognition in the dark

• Long Range Wireless solution for comfortable game play.

REQUIREMENTS

Please note that the rechargeable battery unit should be charged prior to first use. You

may also choose to play while you charge, using the included cable. In case the battery

pack is completely drained, charge the battery for 30 min before playing while you

charge. Note that the PS2 system must be ON in order for the USB ports to be active,

you will not be able to charge the Controllers rechargeable battery pack while the PS2

system is powered down.

What Is Included:

Zero Controller

Zero Receiver

Rechargeable battery pack

AA Battery Compartment

USB Charge Cable

Instruction manual

Please check contents to insure all included parts are present.

Charging the Battery Pak:

1) Attach the Rechargeable Battery Pak to the Zero Controller in the manner shown

in Diagram 1

2) Attach the Mini USB plug of the Charging cable to the front mini port of the Zero

Controller

3) Attach the USB plug of the charging cable to one of the USB ports on the

Playstation entertainment Console.

4) Power us the Console

5) You will notice that the Battery LED Indicator located on the center of the dual

analog stick is illuminated. During the charging process (when the USB charge

cable is being used to recharge the battery pack) This LED indictor can be

interpreted as:

• Glowing LED The Battery Pack is Charging

PAGE 1
Zero Wireless Controller for PS-2 Item 80595 Thank you for purchasing the Nyko Zero Controller for the Playstation 2 entertainment system. This device is designed to provide a comfortable and reliable game play control for your PS-2. Please review the instructions below to ensure proper installation and use of this product.
PAGE 2
• Blinking LED, The Battery pack is nearly fully charged • LED is OFF, the battery pack is fully charged. Please note that the LED will not be ON while you are playing without use of the Charge cable, with the Exception of: SLOW Blinking LED with no Charge cable attached, this indicates that the battery needs to be recharged, and is almost completely drained. INSTALLATION AND REMOVAL (See Diagram 2) ATTACHING: 1. Always attach and remove receiver while the console is turned off 2.
PAGE 3
• Make sure your Zero Controller is properly removed (please refer to INSTALLATION AND REMOVAL) Try to keep all of the controllers accessories in the same are to avoid loosing any important accessories • Store in a cool and dry place to avoid loss or damage. . If storing the unit for an extended period of time, remove AA battery Cells from battery compartment, and detach the rechargeable Battery pack from the controller.