Quick Start Guide

RF1204 Quick Start Guide
 The RF1204 433MHz water leak sensor requires 1 x 23A battery. Depending on controller and leak configuration, a standard battery should
last 5+ years. We recommend lithium batteries for a longer battery life.
 Once configured and tested, the RF1204 should be positioned in Leak Sensitive locations:
 Laundry Room Floor
 Floor by hot water tank
 Below Dishwasher
 Bathroom/s behind toilet
 Floor behind fridge with ice maker/water
 Under kitchen sink
 Sump pump
Caution: If you do not have experience installing
and configuring RF1204 type of devices, please
consult a professional installer.
Specifications:
 Model: RF1204
 5+ Year Battery Life
 1 x 23A Battery Type required (12V)
 433MHz Wireless
 Wireless Range: 30M (line of sight)
 3 x micro button probes
 Air Gap Water Sensing for Zero False Positives
 LED Blink Status Leak Alert
 Speaker beep Leak Alert
 Intelligent 433MHz Signal Spacing
 50+ Leak Sensor per Controller
Positioning Sensor:
Select a clean area that is likely to pool water in the case of a leak. Place the RF1204 on the floor or surface in this leak sensitive area. The surface
should be flat so that RF1204 is resting with all three legs touching the floor or flat surface.