Product Info

EVADEXTREME USER MENU

1. Power ON/OFF

Power ON: Press and hold the power button till to GREEN LED blinking or light up.

Power OFF: Press and hold the power button till to the RED LED flashing.

2. Pairing(Register mode)

a). Press and hold the power button to turn headset power ON, the power LED should

blinking in Green color.

b). Enter the pairing mode: Press the volume down button at 3 times continually, then press

and hold thevolume up till to the RED and Green LED blinking at alternately.

c). Main unitenter the pairing mode first then also the Remote to pairing mode.

d). The Green LED of Remote headset will several blink at fastly,then turn off after paired, press

the power button to quitthe pairing mode, keep the Main unit on the pairing mode then can pair

with more Remote or press the power button to quit the pairing mode.

e). Repeat the above step “d” for more Remote headset paired with the same Master,

or press the powerbutton to finish the pairing(register).

(Note:

①. The Mani headset can accept maximum 8 remotes register in full duplex, or all the

remotes fixed on listening mode, total register number over 250 headset available on listening

mode.

3. Talking and listening

a). The Main and Remote headset will start to search each other after power ON, the GREEN

LED flash 1 time each 3 seconds. The headset will be link together automatically when the

pairing ID confirmed by master and LED turn ON in GREEN color.

b). Press the volume up and down

button to adjust headset speaker sound volume.

4. Mic Muted

Press the MUTE button on earcup tostop and activate Microphone function.

PAGE 1
EVADEXTREME USER MENU 1. Power ON/OFF Power ON: Press and hold the power button till to GREEN LED blinking or light up. Power OFF: Press and hold the power button till to the RED LED flashing. 2. Pairing(Register mode) a). Press and hold the power button to turn headset power ON, the power LED should blinking in Green color. b). Enter the pairing mode: Press the volume down button at 3 times continually, then press and hold thevolume up till to the RED and Green LED blinking at alternately. c).
PAGE 2
FCC Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.