Data Sheet

Electro-Voice | RE3-ACC-PASP 1 x 2 passive antenna
splitter kit
RE3-ACC-PASP 1 x 2
passive antenna splitter
kit
▪ Splits two antenna signals into two diversity
receivers
▪ Passes 12 volt booster feed to active antennas or
boosters
▪ Low insertion loss
▪ Ideal companion kit to the RMK2 dual rack mount kit
▪ Also functions as a 2-in x 1-out combiner for sending
two transmitter signals to one antenna
The PASP is a passive antenna splitter kit containing
necessary items when splitting and sharing two
incoming antenna signals between the diversity
antenna jacks of two receivers. An ideal companion kit
to the RMK2 dual rack kit, the PASP takes the signals
collected by the front-mounted antennas on the
RMK2’s CXU2 jacks, and distributes them to the
diversity antenna input jacks on two receivers. Will
adapt any other sources of incoming cable-bound RF
signals via BNC from remote antennas.
Notice!
Requires incoming signals attached via anten-
na cable (not supplied).
Technical specifications
RF carrier frequency range:
10 - 1,000 MHz
Impedance: 50 Ω
Isolation: 20 dB
Insertion loss:
2 dB
VSWR: 1:2
Color: Black
Net weight: 10.4 oz. (295 g)
Gross weight: 12.7 oz. (360 g)
Dimensions:
23.6 mm
PASP
R1
R2
ANT
Passive Antenna Splitter
10 ~ 1000MHz
DC 12V
Booster Power
72.2 mm
54.9 mm